Dale E O Engineering

Greetings all,

I have decided to start my own suspension tuning service. As the title of my thread states the name of the company is Dale E O Engineering. Over the years I have given much advice on suspension tuning, and am still doing so on a regular basis through pm's and phone calls.

You might ask yourself why now Dale? The reason is simple, I finally got to a point where I really wanted to make a difference, and demonstrate the true potential of the latest generation to the discerning rider.

My company is of course geared towards Husaberg motorcycles with emphasis on the latest generation bikes. If you would like the best handling bike you have ever ridden, drop me a line and lets get you set up.

The attached graphic is a little rough but I thought I'd throw it in there for the heck of it.

willyweeman said:

Dale, I would like some info on your services for my rear suspension. Where may I contact you?

Click to expand...

email me at [email protected]

Once you send me an email I will send you and order form. Fill that out and email it back to me, and I will send you a quote!

Thanks for your interest!!!

Dale

titan said:

Hi Dale ,
Titan here I have a 2011 berg 570 .I have had it resprung and revolved to my weight and I cannot get this setup right .I have no confidence in riding it . Seems to be to harsh . I have .49s in the front and a p25 in the rear.I weigh 100kg.I have tried adjusting the clickers but no luck .DO you have any suggestions or recommendations as I live in Perth Australia.

Click to expand...

What is the rate on the P25?

titan said:

Hi Dale I'm not sure but it's a racetech p25 progressive it might be on the racetech site.

Click to expand...

Nope. All it gives is a "spring rate calculator" doesn't say what the spring rate is. Without knowing that I have no way to comment. Sorry.


Did you do the work yourself, or did someone else do it for you?

If someone else did it have you talked to them about it?

You say that you have no confidence in your set up, could you please be a little bit more specific?

Dale

My Husaberg Brethren,

The time has come to move on and leave Dale E O Engineering behind.

Having said that, I want to make sure that all of the Dale E O Engineering customers are well taken care of, and, any future customers can get the best suspension set up and service available for their Berg's, or any other dirt bike suspension.

My long time friend and mentor Steve at Clean Racing USA ( 714-434-9201) can provide all of you with the same level of service, professionalism, and superb level of work that was provided by Dale E O Engineering. Steve has well over 35 years of suspension work, has done work in all the different disciplines of dirt bike riding, and was the inspiration for the formation of Dale E O Engineering. I can't thank Steve, and all of you enough for the experience of a lifetime of being involved with dirt bikes at this level. Especially the best dirt bike I've ever ridden! I love my FE570, it works awesome everywhere I take it!

Again, thank you all for everything that has been, and all that is yet to come!

Regards,

Dale
[email protected]