Joined Mar 2005
514 Posts | 6+
Sunset desert/ Murray River. S.A/Victoria Australi
Hi all,
The 03 650 is coming down soon to fix its failed crank.
One bearing ( actually 2) bearings I cannot source as aftermarket (read cheaper) are the double counterbalancer bearings- because I have been unable to find any manufacturers(not Husabergs) part numbers for them.
Accorording to info I have is that Husaberg may have taken an off the shelf bearing, and narrowed it as required, and if thats the case it is not an issue as I have access to a precision NAGASE surface grinder at work.
So what I need is the OD, ID and width of these bearings-preferably prior to stripping my engine so I can can have them on hand ready to go.
I have done a search and checked the doc ( Im a good lad, ey Taff :lol: ) but no luck with finding this info
Any help would be appreciated guys.
Cheers all , its beer o'clock
arty:
The 03 650 is coming down soon to fix its failed crank.
One bearing ( actually 2) bearings I cannot source as aftermarket (read cheaper) are the double counterbalancer bearings- because I have been unable to find any manufacturers(not Husabergs) part numbers for them.
Accorording to info I have is that Husaberg may have taken an off the shelf bearing, and narrowed it as required, and if thats the case it is not an issue as I have access to a precision NAGASE surface grinder at work.
So what I need is the OD, ID and width of these bearings-preferably prior to stripping my engine so I can can have them on hand ready to go.
I have done a search and checked the doc ( Im a good lad, ey Taff :lol: ) but no luck with finding this info
Any help would be appreciated guys.
Cheers all , its beer o'clock
arty:
