- Joined
- Jun 13, 2007
- Messages
- 3,871
- Location
- south east WA Australia
they were uploaded to the site gallery spanner. gallery no work
which one are you after ?
which one are you after ?
Conrod Drawings
- Thread starter bushmechanic
- Start date
Help Support Husaberg:
- Joined
- Jun 13, 2007
- Messages
- 3,871
- Location
- south east WA Australia
ok I'll upload them lateron
- Joined
- Nov 23, 2012
- Messages
- 2,384
- Location
- Iceland
Might be good to toss them on the Google Drive thing as well, at least until something else is arranged - if only to have a backup copy somewhere .. ?
- Joined
- Jun 13, 2007
- Messages
- 3,871
- Location
- south east WA Australia
ok tourist
will do from home computer .. from my google account with big *******
in the meantime spanner here is the 550 rod
the 570 rod is 120.5 centre to centre with 42mm id big end
will do from home computer .. from my google account with big *******
in the meantime spanner here is the 550 rod
the 570 rod is 120.5 centre to centre with 42mm id big end
- Joined
- Jun 13, 2007
- Messages
- 3,871
- Location
- south east WA Australia
OTTOMH according to the doc the older 550 rod was 124mm ..
the latest 550 rod is the one in the drg still has 32mm pin
i'll send you the details of the 550 deck heights and liner length lateron .. i think i can see what the Spanner cad program is working on
the latest 550 rod is the one in the drg still has 32mm pin
i'll send you the details of the 550 deck heights and liner length lateron .. i think i can see what the Spanner cad program is working on
- Joined
- Oct 30, 2012
- Messages
- 716
- Location
- Belgium brugge
I would like some dimensions of the
Big end pin/big end bearing for a 570 inside/outside diameters and width???
Maybe better to wait and meausure the carillo rod I have yet to receive before ordering the suited bearing so I can put the motor back together...
Big end pin/big end bearing for a 570 inside/outside diameters and width???
Maybe better to wait and meausure the carillo rod I have yet to receive before ordering the suited bearing so I can put the motor back together...
There are some conrod dimensions on the side in the atalog
. . . : : : Bienvenido a SAMARIN : : : . . .
. . . : : : Bienvenido a SAMARIN : : : . . .
- Joined
- Jun 13, 2007
- Messages
- 3,871
- Location
- south east WA Australia
yes is possible but the dimensions are based on collective knowledge shared here (not from me measuring an actual rod) and so may not be correct.
i can upload what i have in a few days
i can upload what i have in a few days
- Joined
- Nov 20, 2001
- Messages
- 17,043
- Location
- Ely, England
I have two rods here from the 400s I believe, I really cannot be 100% sure but they are 20mm wide which makes them 2001-2008 rods.
they have 119mm centres. one came out of a 2002-2003 FE400e for sure.
I can't be more accurate than that.
Taffy
they have 119mm centres. one came out of a 2002-2003 FE400e for sure.
I can't be more accurate than that.
Taffy
