One of my rivets has come lose on my FS650E, it's got the akra Ti, anyone know what size/type of rivets I need, or has any I can buy ?
Many thanks . . .
Many thanks . . .
Akrapovic Rivets ????
- Thread starter WazzaBerg76
- Start date
Joined May 2011
700 Posts | 3+
Wisconsin, U.S.
A decent hardware store should have some, just measure or compare the size of the head by the depth, not sure if the akrapovic is something special but i have used the stainless revets with good luck, the aluminum ones will fall out for sure and steal will rust
Joined May 2011
700 Posts | 3+
Wisconsin, U.S.
just make sure when you set them that you are using a heavy duty rivet tool, them biatches are hard! and if they break early the rivet will just be in there loose and it is not fun getting them back out, so make sure you do not get ones that are too deep and try to break them in one looong stroke of the tool, i also put some silicone sealer on the rivet before install to help prevent little leaks after...
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
