600 rod kits!

is there any interest in new 600 rod kits being made?

pin, bearing and rod, no little end required. cost will be 300gbp or 320 euros or $480.

I'm only getting a dozen so I guess: "speak now or forever hold your peace"!

I'll go ahead if I can get 6 orders.

the FC501 rod was 4mm shorter. there are means and ways of using it for the 501 like a shorter piston, a thick base gasket etc.

regards

Taffy

so your sales pitch to me is that: "when you are desperate and have 6 left on the shelf, I'll come along and beat you down on price to nothing and steal it off ya!".

annie, go get the gun... :lol: :lol:

regards

Taffy

pin and bearing is 112 pounds GBP.

regards

Taffy

as usual the information is wrong. alpha won't do you a one off bearing or pin and prox make everything but Husaberg stuff. WaFi

all lies as usual, if a cam chain is supplied wrongly then for a moment money is owed so stretching the actuality as usual. you don't owe money as such.

you got a 'bearing' not 'bearings & pin' which is what we are on about so more balls.

as for the JBS racing (BEN BALLARD - he of the 700 kits) head gaskets, nobody knew they were wrong for weeks afterwards if not months. I was fitting and selling OEM mixed in. And it was myself who found out and I said I didn't know who I had sold them too. you never said you had any then and I believe this is the first time you've mentioned it some 24/36 Months later so I can't even recall what and when to clarify anymore. you were certainly offered a refund at the time if it was mentioned.

fact is you're always going on about how good JBS racing are but you have always known their HGs to be shyte but because you suck so well you don't want to tell anyone whether you are a swallower or a spitter! :lol: :lol: :lol: :lol:

if you were an even handed man - which you most obviously aren't - you would say just how crap his stuff is. at least I man'd up and demanded my money back at the cost of not dealing with him again....according to him there was 'no warranty'. and that's what all his customers get = no warranty.

Dave Clarke sent his back with an inscription on the packet. he didn't tell me he knew they were wrong, i guess that's business but then JBS racing then sent the HGs, still in the same packet with DCRs writing on the front: straight out to me!

Now I see you've had shed loads of trouble with your HGs and you know what?

you get what you deserve - all of it.

as far as I'm concerned, my conscience is clear, it's just that I really never did meet a bad aussie till I met you. shame how one sick apple ruins the barrel and lest anyone forgets:

THIS ALL STARTED COZ HE THREW A TANTRUM IN THE "HANDLING FOR ENDUROS" THREAD. got his facts wrong, went into a tizzy and hasn't stopped his rancid attacks ever since.

how the site lets you get away with these non-stop jibes I don't know.

when you and I WERE "talking" you let a lot of stuff go, you are now twisting things but I won't let you get away with it. maybe soon the site administrators will finally wake up and realise that all that glitters in your mind ISN'T as you say (GOLD?) but infact just a series of cheap jibes that are lies, unwarranted attacks and you yourself are descredited yourself enough to be told to shove it!

without doubt the site is now being damaged by this, I was asked to let you continue doing these non-stop cheap attacks but you are targetting anything I do or say here. Ken hasn't offered an endgame I presume hoping you'd grow up but this has to stop.

so everytime you tell a lie I will tell everyone the truth about you until everyone is so sick and tired of all this that everyone else demands an end. then the question will only be: why didn't the administrators stop this at the beginning before this all got silly. poor judgement again....

Taffy

8O 8O

:lol: :lol:

referee!

regards

Taffy

I'm sure Ken would tell you that he asked me to let your sideswipes and lies go for the sake of stopping an all out battle on here. for weeks your sidesnipes and little digs kept going. don't call yourself Mr innocent. if you continually tell fibs about people you'll get the same from me everytime.

so what with you losing it on the 'handling thread' and the continuous snipes it can be of little surprise that I've decided to defend myself. I started this thread and as usual you come in with another confrontational view. you can't let anything go so why would I not tell you what an A hole you are?

start your own bloody thread on it?

you said there were dozens of people unhappy with my camchafts and they were all in contact with just you! that is funny!!! and now you reckon you speak for australia as well. why don't you get in touch with elvis while your at it god! :lol: :lol: :lol:

now the lies you've told above
1) no engine shyte itself. we couldn't turn a newly built motor over by hand and when we checked found a JBS headgasket to be undersize. engine was then built with a OEM HG and all was well. as you know, Ben is a reclusive blighter and all I could do was put them back in his lap. when I threatened him with court action I got a refund. there is no reason at all why I have to record and therefore "remember" who got a n OEM HG and who didn't. stupid comment.

I used Alpha 30 years ago. I really have forgotten what you're on about and I no longer think there's even a valid point in there? it's so long ago I really want to just put it down to my alzeimers!

at the time we were getting on fine and a credit was just fine, that you sent on the cam chain was also no problem to you. I was willing to sort the valve out but you insisted that all was OK if you machined the OD down slightly. I explained that my toolmaker engineer had clearly held the valve too near the head of the valve.

If you keep jumping on everything I say with cheap jibes and aggravating comments designed to cause bickering and acrimony you will get it.

Taffy