This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

450fe stalls out of nowhere

Joined Jun 2024
5 Posts | 0+
Norway
Hi all. Recently bought a 2012 fe450 that had some problems, a ton of exhaust leaks and ran rough. Now it runs fine, and the only exhaust leak that wont seal is the slipon, but i'll fix that some other way!

However, sometimes when rolling in neutral, or waddling clutched in, the motor just shuts off like it would if i pressed the kill switch. Anyone know why this happens?

It also pops A LOT, and LOUD on decel, but that might be because of the exhaust leak?

Thanks in advance
 
Also sometimes it takes a while to start, other times starts right away, regardless of hot or cold
 
possible plug cap failure?

Taffy
I just changed it out for a vb05e, still runs the same. I took it out for a little bit of a longer test ride yesterday and it started leaking oil pretty bad, looks like from front sprocket countershaft seal. I'll have to sort that out first 🙃
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions