2012 Fe390 now in the garage

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Us anti-seized on those taped hole when putting it back together. Nice by the way
 
Last edited:
All bolts will be treated to some copper slip

All elec connectors be packed with dielectric grease an say be cleaner than new

Frame guards might drill out swingarm bilt hole and bond them onro frame as they gather **** behind them
 
You seen be more then on top it.... good to be young.
 
Last edited:
The factory frame guards rub the frame badly, had to touch mine up. Another idea is to put clear vinyl on before frame guards.
 
The factory frame guards rub the frame badly, had to touch mine up. Another idea is to put clear vinyl on before frame guards.

I plab doing that under frame to protect it againt sump guard

Frame guards was thinking blavk silicone an hust make them part of frame
 
I did my frame (570) with black stone chip from new and it's still good 6 years later. Don't know why you guys are bitchin' about the fuel cap. Nowt wrong we'it. Push the release tab and turn, easy. Never had a problem. Just make sure you get a tank sock in the filler neck.:thumb:
 
I did my frame (570) with black stone chip from new and it's still good 6 years later. Don't know why you guys are bitchin' about the fuel cap. Nowt wrong we'it. Push the release tab and turn, easy. Never had a problem. Just make sure you get a tank sock in the filler neck.:thumb:

My fuel cap requires 2 hands to push it down and rajes few goes to open

Must invest in fuel sock
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top