2004 FE450 camshaft damaged need part nr from KTM

votkarel · May 16, 2021

My cam got damaged because the intake rocker arm bearing

can someone help me with the part number of the KTM camshaft that will fit to my 2004 Husaberg? i may not need high torque.... even 10-15 kw less for my weight are ok, maybe a cam from KTM400

Can I change the damaged rocker small bearing or i must buy the complete arm?

the original HUSA Husq 80036010000 is a bit expensive in my country

I am very very mystified why that small **** bearing stuck in the rocker arm that way, maybe the rocker arm was made in China ?

The oil was 10W60 1.4 Liters, even little more than necessary , also had a small amount 100 grams of aditive Liquy Moly Ceratec ..

tomasnj · May 16, 2021

Hi votkarel

Check the price/parts on Taffmeisters, that is your best bet.

On another note, you really shouldn't put ceratec on a dirtbike - the moly (or whatever micro chemical) flakes will F-up your wet clutch. Also, I see that 300ml of ceratec are to be mixed with 5 litres of oil, hence 100ml of ceratec into 1.4 litres of oil is quite a lot.

Running more than a litre of oil on the bike will only cause problems, make sure to run the oil up to 1/3 of the oil window (when cold) the next time you are changing oil.

votkarel · May 16, 2021

I see...
I believe last time when i adjust tappets, i didnt tighten enough the screw and after few hours the screw tighten himself and applied too much stress to the small roller

https://www.taffmeisters.co.uk/product_info.php?cPath=36_40_128_173&products_id=351

i will try to find it spare part CAM here

Taffy · May 17, 2021

the cam you want as a direct replacement is 100015.

I have just PM'd an Australian recommending a 'softer hit' at the bottom end. This is why for a time, the 380 kit was so popular.

softer hit
lower compression
softer cam
performance jetting kit (yes, really true)

the only cam softer is from the 2001-2003 FE400e which has the '01' cam fitted. I have one or two of these in stock.

anyone with a 470 reading this I would say the same thing.

cheers

Taffy

votkarel · May 17, 2021

Thx Taffy,

can I use the camshaft from 2004 husaberg 400FE ? i found someone here that break apart his bike for good price .

Taffy · May 18, 2021

you shouldn't put a new link on an old chain.

well they never made a 400 in 2004 but if it is a late registered bike then he should be able to confirm the numbers on the end of the cam. (week)42/02........01 as an example.

regards

Taffy

votkarel · May 18, 2021

This is the donnor byke, said husaberg FE400 . its not 2004 . i believe its 2000 -2001

Will the camshaft fit to my engine 2004 , 450cc engine ?? unfortunately will ship it from another town and cannot compare it with mine... its only 40 euros that camshaft
I see that exhaust from cylinder have another shape

Taffy · May 18, 2021

it looks like a 550 2006-2008

Same cam as you have now.

Taffy

Search

Search

2004 FE450 camshaft damaged need part nr from KTM

votkarel

Attachments

tomasnj

votkarel

Taffy

votkarel

Taffy

votkarel

Attachments

Taffy

Similar threads

Register CTA

Recent Discussions