Conrod Taiwan stile

Husaberg 644 · Friday at 7:46 AM

Have a 650-02 that has gone very far, probably 1000+ hours. The connecting rod was very worn, therefore needed to be replaced. Found a connecting rod from Taiwan on an ad. Test drove about 3 hours. The cylinder leaked water, a disassembly was therefore necessary. 105mm without o-rings. Discovered that the connecting rod is wind. Very surprised. Have straightened and reassembled. Test drive remains, if the ice wants

jojo09 · Sunday at 2:27 AM

Please get rid of it.
You´ll regret it.
Plenty of snapped ,crappy 650cc rods were seen...
I have got OEM kits available.

Husaberg 644 · Sunday at 4:17 AM

What is the price for an OEM kit. would also consider trying an MMC connecting rod if anyone has one for sale

Husaberg 644 · Sunday at 4:28 AM

Husaberg 644 · Sunday at 4:30 AM

A good pressing tool

jojo09 · Sunday at 10:20 AM

Husaberg 644 said:
What is the price for an OEM kit. would also consider trying an MMC connecting rod if anyone has one for sale

Aroud 390€.
Message me :
[email protected]

Husaberg 644 · Tuesday at 6:43 AM

Reason for changing the connecting rod, conical big end. No wear 3mm in the middle. The pin and the bearing were not worn at all

Conrod Taiwan stile

Help Support Husaberg:

Husaberg 644

jojo09

Husaberg 644

Husaberg 644

Husaberg 644

jojo09

Husaberg 644

Similar threads

Register CTA

Recent Discussions

Recent Discussions