This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

2004 FE450 camshaft damaged need part nr from KTM

V

votkarel

Joined Nov 2020
19 Posts | 1+
Romania mountains
My cam got damaged because the intake rocker arm bearing

can someone help me with the part number of the KTM camshaft that will fit to my 2004 Husaberg? i may not need high torque.... even 10-15 kw less for my weight are ok, maybe a cam from KTM400


Can I change the damaged rocker small bearing or i must buy the complete arm?

the original HUSA Husq 80036010000 is a bit expensive in my country

I am very very mystified why that small **** bearing stuck in the rocker arm that way, maybe the rocker arm was made in China ?

The oil was 10W60 1.4 Liters, even little more than necessary , also had a small amount 100 grams of aditive Liquy Moly Ceratec ..
 

Attachments

  • Cam.jpg
    Cam.jpg
    89.5 KB
  • rocker.jpg
    rocker.jpg
    89 KB
Last edited:
Hi votkarel

Check the price/parts on Taffmeisters, that is your best bet.

On another note, you really shouldn't put ceratec on a dirtbike - the moly (or whatever micro chemical) flakes will F-up your wet clutch. Also, I see that 300ml of ceratec are to be mixed with 5 litres of oil, hence 100ml of ceratec into 1.4 litres of oil is quite a lot.

Running more than a litre of oil on the bike will only cause problems, make sure to run the oil up to 1/3 of the oil window (when cold) the next time you are changing oil.
 
  • Like
Reactions: 1 person
the cam you want as a direct replacement is 100015.

I have just PM'd an Australian recommending a 'softer hit' at the bottom end. This is why for a time, the 380 kit was so popular.

softer hit
lower compression
softer cam
performance jetting kit (yes, really true)

the only cam softer is from the 2001-2003 FE400e which has the '01' cam fitted. I have one or two of these in stock.

anyone with a 470 reading this I would say the same thing.

cheers

Taffy
 
  • Like
Reactions: 1 person
Thx Taffy,

can I use the camshaft from 2004 husaberg 400FE ? i found someone here that break apart his bike for good price .
 
Last edited:
you shouldn't put a new link on an old chain.

well they never made a 400 in 2004 but if it is a late registered bike then he should be able to confirm the numbers on the end of the cam. (week)42/02........01 as an example.

regards

Taffy
 
  • Like
Reactions: 1 person
This is the donnor byke, said husaberg FE400 . its not 2004 . i believe its 2000 -2001

Will the camshaft fit to my engine 2004 , 450cc engine ?? unfortunately will ship it from another town and cannot compare it with mine... its only 40 euros that camshaft
I see that exhaust from cylinder have another shape
 

Attachments

  • HusaPoza.jpg
    HusaPoza.jpg
    91.5 KB

Similar threads

V
2004 FE450 camshaft advice
Replies
2
Views
679
votkarel
V
Taffy
New - improved carb needle 2004-2008
Replies
3
Views
2K
FlyingZebra
FlyingZebra
JoeUSA
2003 Camfollower Wear
Replies
0
Views
1K
JoeUSA
JoeUSA
deadeyedick
2002 FE400E fixes and mods questions. My first Husaberg
Replies
9
Views
5K
70marlin
7

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions