wheel

Hi everyone, I wanted to take advantage of the cold months to repaint the wheels of my husaberg. I would like to take everything apart to be able to sandblast and powder coat. My bearings and wheel dust boots are in good condition. Is there the possibility of disassembling them without damaging...

New to 'Bergs with a 2011 FE570. I'm freshening up the bike and would like to order new wheel sets (blue hubs/blue rims) I'm not seeing any aftermarket wheel options. Are KTM wheels interchangable? Also any suggestions on quality wheel sets? Thanks, Kurt

Just thought I'd write this journey for anyone with a 17mm axle LC4 Front wheel doing a conversion to 20mm and hopefully this will prevent a few trial and error bits along the way. To convert the 17mm front wheel it is intensive but this is what I've learnt... The speedo side bearing is (from...

Hi I bout a beaten up Fe 400 and it has a 19" rear wheel matches the front rim type and appears to be stock ...any ideas other than someone fitted a FC rear wheel to the bike - ps this bike is the roughest berg I own but starts one kick and runs like a little clock. :eek:

I have just bought three large boxes of NOS from Finland (T. Örthén Oy) and I was lucky to find a pair of brand new rear wheel spacers in there. those that have a bike that age will know that they are handed and not the same. I'm going to have them made but I'm not sure which way to go...

Does a Ktm 690 cast front wheel fit a 650 SM or is the Hub too wide? I already have a 26mm axle so that should already be fine. The rear wheel is alredy fine.

Hi guys! If you have cush drive wheel what you want to get rid off, let me know. I live in Europe. Juha

Hi All, First post so be gentle.....lol Apart from riding and tinkering, my other pastime is light Engineering work ie Turning and Milling. I was recently give the task of resurrecting a badly bruised front axle from a 1999 FE 600. This axle came to me with a Bearing (6302) firmly...

will they fit in a 2009 FE450E sloper?

I have a 1996 400 Husaberg front Wheel. Will the 501 front wheel from a 1999 Husaberg be a direct swap? They look the same. A little help before I pay for long distance shipping. thank you....sl

Preferably 18” but 19” is ok. Hub will work also . Ktm substitutions ok also.

Looking for rear wheel preferably and 18” but will be ok with a 19” rear wheel or even just the rear hub for 2001 FC550. Cheers.

Sold Thanks guys, wheel is already sold.

I have noted that when I have nipped up my forks to Axel that their is a gap between the wheel bearing bushings, I think that it should be no gap, but looked at 2 other Bergs a mate had and they were the same as mine with about 3mm gap. I would think that there should be no gap at all, I have...

If it has a color code and someone know it than please share it. Thank you

I'm looking for a front wheel for my bike the spindle is 26mm

I have for sale a cush drive rear wheel. it was recently used on a 2004 husaberg FE 550. I think it was on a KTM 640 when new. it is in good condition and the rim is silver. comes with a rear brake rotor. also has a Metzler Karoo tire in real good condition on it. $200 plus shipping. any...

Looking for the free wheel hub for my 03 Husaberg fe650 The inner part in the one way bearing for the electric starter. FE450 and FE550 have the exact same part. Not possible to buy from dealer since its not being produced any more. SO if you got one.. New or used i'm interested.

All, I'm relatively new to the forum, but I've been lurking in the background soaking up all the great info this community has to offer, so thanks! Picked up a 98 FE501E last fall that wasn't running and had coolant in the oil, the e-start was also not working. Wanted to make sure the bike...

Hi all, I have a WP Extreme fork from a Fe600 (might from 1998, not sure) that I will install on a Suzuki DR800 It came with wheel axle and 2 spacers on it, one steel and one aluminium, similiar thickness, same i.d. My axle is 17mm Now I need to buy front wheel and caliper/bracket as...