timing

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    Help with fe600e engine timing!

    Hello! I need help with fe600e engine timing The marks are visible on the camshaft sprocet but not on the crankshaft sprocet?
    • miika3
    • Thread
    • enginetiming timing timing chain
    • Replies: 2
    • Forum: Mechanical
  2. J

    Timing issue

    Good evening, I was doing some maintenance and when I was assembling the bike I noticed the alignment marks are a little off. The top cam chain indents are parallel to the head but the one on the idler gear is not exactly in between the other two below. I was hoping some one could tell me if...
  3. N

    00' 501 Husaberg Timing chain problem

    So.. long time follower and reader.:o Engine Nr: 1054383 / 220067 1999-2003 Bike: YU7FC5K94Y0000165 I am changing piston on a 00 mod Husaberg 501. Timing chain was new when I bought it, so was planning on reuse it for season. This is the engine type where you don't have to split the engine to...
    • NorBrap
    • Thread
    • 501 chain husaberg problem timing
    • Replies: 6
    • Forum: Mechanical
  4. E

    Timing chain master links 04-08

    Hi guys I'm working on a hybrid ktm rfs where the deck height isn't matching up enough to keep the timing chain tight. I was told the berg parts will fit and are a different pitch 10mm instead of 8mm on the ktm. If true it would give me the extra length I need on the chain. The parts fiche...
  5. A

    FS650 timing cam position??

    Hi i opened today to check my timing position of cam but no sign on or something to be sure for timing corect any ideas Expert people :)
  6. M

    1995 FE350 Timing and TDC

    Replacing the cam shaft bearings on my 350. Anyone have any tips on location TDC I don't see any marks on the flywheel Thanks
  7. S

    timing chain riveting tool

    Hi , I'm looking for a timing chain riveting tool not too expensive . Any suggestions ? Thank's
  8. P

    Ignition timing problem

    I have an FE400 1998 that won't start and i'm quite sure it has to do with the timing but how do i change it and what marks am i looking for? And how do i know when the sparkplug sparks without the engine even starting at all?
  9. S

    2004 501 valve timing manual

    Hi folks, I've bought a 2002 470,fitted with a 2004 501 engine, the camchain had snapped due to a nut falling down the camchain tunnel.. I bought the bike like this, so I've rebuilt it, but im not too sure about the valve timing, can anyone help? Cheers, shug. I managed to find a 2005 manual...
  10. W

    cam timing, no marks..... FE650

    so, i took part the engine without checking for timing marks on the crank gear and the balancer shaft gear. i've tried a couple of combinations with no success. crank at TDC, balancer at BDC, cam sprocket marks horizontal. 3/4 of a rev and the piston touches the valves.
  11. K

    Help Fe 450 2005 value timing ?

    Hi av got a Fe 450 2005 was running but was bogy and bogging out after full throttle it was point to words value timing so a tryed to do value time using the 1/6 method not my greatest idea lol it will not start and will only backfire dose anyone know the right settings or know how to adjust it...
  12. S

    Timing chain tensioner for '09 450 sloper

    Had this FE450 for a month or so with 220 hours on it, and on startup, there is camchain slap that takes a minute or so to clear whilst the auto hydraulic adjuster pumps up. I'm told a manual adjuster is the way to go? If so, where can I get one?
    • spiney
    • Thread
    • 450 chain sloper tensioner timing
    • Replies: 5
    • Forum: Mechanical
  13. J

    Mechanical timing chain tensioner 1989-2008

    Hi again folks. I also have machined some mechanical timing chain tensioners. If you are interested. https://www.motoren-israel.com/Husaberg/Eigene-Produkte/Mechanischer-Steuerkettenspanner::202040.html Thank you for your interest. Greetings from Germany
    • jojo09
    • Thread
    • chain mechanical tensioner timing
    • Replies: 0
    • Forum: Mechanical
  14. W

    FE650 2001 timing chain HELP!!

    i just got a 2001 FE650, it has a broken timing chain and a bad tensioner i think. i need a source for the chain and tensioner. where can i find an ( 06B ?? ) chain of good quality. 70 links?? i may need a new lower sprocket as well. thanks for the help!!!!
  15. H

    How to set idle timing 06 fe550

    How to set idle timing for 06 fe550.
  16. B

    08 fe650 Rocker Arm Bearing and Regina Timing Chain

    Hey guys, Sent my head off to Thumper Racing for a port job. While I am in the head/rocker cover I want to replace the rocker arm bearings, maybe cam bearings and use a Regina timing chain (Regina was recommended by JBS) Anyone have the rocker arm bearing size and the Regina timing...
    • Big Berg
    • Thread
    • arm bearing chain fe650 regina rocker timing
    • Replies: 10
    • Forum: Mechanical
  17. E

    Connecting standard DID cam chain / timing chain

    Hi all I want to replace the timing chain on my 07 FS550 soon. I've bought a new standard DID chain together with the standard joining link to suit. I know there's a ridiculously expensive OEM tool that can be used to make the join but are there any other aftermarket tools that will do this...
    • Eucl1d
    • Thread
    • cam chain connecting joining standard timing
    • Replies: 5
    • Forum: Mechanical
  18. B

    08 fe650 Ignition Timing advance for better performance and starting.

    A friend of mine who helped me locate a complete fc650 stator, flywheel and 2 covers told me- "if you file out the pole pic up points slightly enabling you to advance the ignition slightly it makes a world of difference to starting and performance" Anyone else have knowledge or adjustment...
    • Big Berg
    • Thread
    • advance fe650 ignition performance starting timing
    • Replies: 8
    • Forum: Electrical
  19. L

    FC 600 problem, after change timing chain.

    Hello, One week ago i bouhgt husaberg fc 600. I think its 1995y. Before my mods it was hard to start engine, when it start running moto doesnt want to go upper rpm, only shooting from the exhoust. I had to change timing chain, coz old one was very long. For now husaberg dont want to...
    • lukax123
    • Thread
    • 600 chain change problem timing
    • Replies: 6
    • Forum: Mechanical
  20. L

    Problem with timing chain length and capacity

    Hello, i just bought FC 501 +- 98year (still dont know about capacity of this engine, im looking for diffrences between 501/600ccm3) and here is a question: I have 82 link chain inside, so it's a 600cmm3? or 501 with chain from 600? (i tink its not possible to put 78 link inside. But i need...
    • lukax123
    • Thread
    • capacity chain lenght length problem timing
    • Replies: 2
    • Forum: Mechanical
Back
Top