thread

Of possible interest: http://www.flattrack.com/dc/dcboard.php ... =186&page=

I have always taken for granted that the thread pitch was 0.8mm so when setting valve lash I have used the 1/8 turn method. Where did I get the 0.8mm from? When actually measured the pitch is closer to 0.75mm per turn, provided my gauge is O.K. That would translate to a 0.09 lash or so. To...

Last night I tried adjusting the tension of the chain. What happened was that the fooking bolt sheared. It's the one on the back of the swinging arm. It's approx 10mm or 3/8" but I'm not sure. Does anyone know which diameter it is?? Or which treads are on it? I'm thinking of welding a nut...

Hi all have just had the frustration of finding that the thread in the head for the rocker cover bolt which goes through the exhaust rocker pin is stripped. have just had new rocker bearings put in by dealer after i removed the rocker cover myself. when putting back on had difficulty as...

Hello all, Regarding the CW thread: I am a bit puzzled regarding several comments directed toward me. Have I not supported Husaberg? Have I not given more than I have received? It has been stated that I am negative and unsupportive. Others elude that "my negative comments" regarding the CW...