thread

its a tradition on DBW to create an "FNT" eg #Alt/FNt/The source of the soul of a motorbike - dbw - dirtbikeworld.net Members Forums what I propose here is for people to find pictures or videos involving motorcycles (say husabergs or husqys) as a theme and post them up here. of course...

:mad: :mad: Discovered this today, suspect the nut ran out of thread before tightening? Should there be a slim washer? Cut a 14mm fine thread and nut to suit? No sign of loctite!!:furious::furious:

As this forum has risen from ashes in the last couple of months I think we need a picture thread. So, members, please post pictures of your motorcycles so we can all enjoy this beautiful machines. You are welcome to post more than one pic.... ;) I'll start; 2004 Husaberg FE450 Force Edition...

Hi all, Rode a 550 last summer and I still can't get it out of my head, so I'm doing my homework before purchasing one :) We've had a really good summary thread on the main bearings recently: viewtopic.php?f=5&t=18085 Some local riders have warned against counterbalancer bearing failure. How...

Johns thread is full of good info but i noticed the last few pages have some people wondering what to do. https://husaberg.org/t/main-bearings-failure-must-change.5986/ the ideas here are not just my opinion, there are a great many good minds who have worked out what causes the failures and...

So after deciding that the indicators on my 08 FE650 are about the worst design in the world (the bulbs don't seem to fit the sockets properly and I am constantly having to pull them apart and fix them) I have decided to go with LED's as I'm hoping they will be more vibration friendly. I...

2010 FE 450. Two years old and only 15 hours because total lack of confidence in this machine. I end up using the ol' KTM 400 or reliable two stroke when I go out. Have had three failures on the trails and called Rick at BOSS several times to try to identify why this POS paperweight tends to...

First, I promise I searched all over these forums all day long for this specific issue before posting this. Went to start my bike yesterday (2010 FE390), and the starter was turning over normally and it started up for just a second and cut off. Tried it again, and this time it just turned and...

Since I'm as likely to be on pavement as I am off road, when the factory tires need to be replaced I think I should at least consider a maybe a 50/50 tire or a 30% street/70% off road tire. I was wondering if anyone had any suggestions. This is a 2011 FE570S. Front tire is a 90/90-21 and the...

Hey Guys, I am not sure what feat of physics allowed me to loose the seat screw for my 08 fe450 but it came off on a ride over the fourth. I called a dealer and they want $36 for a screw with a swivel top. That is a no go for me I will just use a wing screw for it instead. I need to know the...

I'll start. 09 FE570 100 hrs approx 2000 miles. Bike flamed out on me 1/2 dozen times in the first 30 hours. Adlusted the idle and had the ECM reflashed, no problems since. Changed the drive chain at 70 hours due to a little surface rust (no sprockets). That's it. Change the oil about every 15...

This is my first attempt at using a helmet cam: [youtube:3tiuynci]http://www.youtube.com/watch?v=CRidXzvctaM[/youtube:3tiuynci] I have more - they are encoding now (I finally figured out how to export from iMovie to 1080p), but the next one I will be even slower than on this vid. I know - I am...

hi, new to these here parts. Currently own and stack an '09 FE450. Previous rides, in order of ownership, are: '91 Virago xv250 (it was my mums!!) '02 CBR1100 Blackbird XX (hit 300km/hr on it according to the speedo) '05 TTR250 - my first dirt squirt and a machine that gave me nothing but hate...

Admin, please remove this post. Thanks

Hey all, I'm a new Husaberg owner, picked up a 2005 FE450E the other week and it's a ripper of a bike but very rattly. So the paranoia's set in and I've found a video on youtube of one with a similar sound...can anyone place it? http://www.youtube.com/watch?v=aqJFWIaVMDk I'm really...

I was checking the torque on the bolts today and found out one (out of 4) of the front wheel clamping screws threads was completely worn out. I took out the bolt and found this: I still have some days on my warranty - do you think the dealer will take care of it ? if not how can I...

Hi HusaGuru's, I wanted some input on jetting a 550. It ran good no matter what jets I tried(stock, etc.), but would like to here from more experienced jetting technicians. Altitude 8-12k feet pj 42 paj stock mj 165 maj stock NCVS needle clip 4 fs...

briefly spoke to boss, whilst ordering some part, and mentioned that i'd been thinking of starting the discussion for the next force ride. So here it is. march '07 feels like it was years ago and i've even been trying to persuade the wife to take a week in the USA, with of course a couple...

Brits/Aussies/Kiwis are invited! So... who's looking good these days, hmm?

hi all anyone know the diameter and thread pitch of the oil plug on a 2004 berg? i want to install a fumoto vavle thanx cheeseberger