system

Looking to buy one

It appears I have oil getting into my cooling system. I noticed last week when checking the level (I use Evans) that there was a mysterious paste accumulating on the metal end of the radiator cap. I drained the coolant, cleaned off the mysterious paste, and hoped it would never come back. After...

I have Cycra handguards on my Berg, but the way I like to have by clutch lever and the cup, the cable touches the guard mount and it's not super duper. Believe it or not but I do fall (seriously I have been falling very little with the Berg compared to the DRZ, just that one fall happened...

Hey guys I am wanting to do an exhaust swap on my 2000 FC501 and am wondering which years and systems will fit the engine head. I would like to put a system off an 02 470 on it, so my question is, will this fit? I know I woul probably have to mess around with building some brackets for...

IHMO, I have come to find that it is a good idea to bleed your cooling system on a regular basis. It only takes a moment, and I have found that there is usually just a smidge of air under the bleed screw. If you boil the bike over, you really need to bleed the system. You'll be amazed at...

I'm having battery issues (I think). The problem I am having is that I have just put my second new battery in and I can fully charge it ( 2 amp charger etc.) it will spin and fire when hot but if I ride for more than 10 minutes the battery is not strong enough to spin the engine over. The bike...

Looking @ possibly getting the exhaust for my 07 fs650e & just wanted to see what you guys think .Money is not an issue I just dont like wasting it. Any offers on a stock system w/300 miles on it in mint condition ?

Hi guys! How do I do this at the right way? Greatful for respons! :)

Hello All, Some of you may remember that some time ago I embarked on a little project to design and build my own exhaust system. I've had some other things on my plate preventing me from spending much time on this which is why it has taken so long and progress is so slow. However, when I...

Hi I will be running an '07 FE650 with the Akrapovic full system at low altitude in desert racing, any tips on what jetting I should start with ?? Thanks

I have an 07 FE450 that kicks over super easy hot or cold. So easy, I have considered taking the e-start off the bike. My buddy has an 05 FE450 that is really tough to kick over and rarely will the e-start actually start it when it is cold. It seems like the decompression system is not...

Mmmmm good...post your humor.

Had a rather wet ride last weekend and my bike(04 fe450e)was filling the carb vents with water and running poorly and sometimes stalling during the deeper crossings.Anyone install one of those PC racing carb vent systems...how did it work and where did you mount the box?....thx...nsman

HI, Getting the frame replaced this week so i need to spend some more money! I would like an aftermarket exhaust system with removable baffles as i will be using the bike on the track and the road. I have seen some where the endcan comes apart and you can adjust with different baffles...

Found one made for a new model KTM at rlrproducts.com. Could probably find a place to mount it under the seat similar to where they recomend on a KTM. dan

It is being developed in England, so watch out! Joe http://www.motorcycledaily.com/17march06_speed.htm

Has anyone tried the powernow and powernow plus on their Husabergs. I have read a lot of good things about it, but dont know anyone personally that has tried it.

This is an odd story but true. My 03 FE 400e has been working great and have diligently cleaned and dried the Stator/rotor regularly. Was out clearing and preriding part of the trail for the Two Day Ride near Algonquin Park in Ontario Canada, and was caught in a particularly nasty section when...

I noticed my radiator was leaking, and I pulled it to send it off for repair. I noticed when it was draining that white deposits, gritty, flaky draining out with the coolant. the inside of the raditaor looks clean as far as i can see but whoa! the hose stub on the bottom of the radiator has...

Hi everybody, I'm just wondering if anyone has a good solution regarding leaky exhausts. The problem is where the dual exhausts enter the manifold. This has been corrected on later models with twinwalled connections. I haven't come up with something that can both seal and move. Maybe someone...