system

Hi guys, I notice that a small amount of oil is going out from breather pipe which is just taken under the motor support. I notice this oil leak after last oil and filter exchange, i put first time Hiflo, is't maybe possible to have some influence on this? Or is it maybe connected with ambient...

HI All, I wanted to share my experience with a clogged fuel injector. My bike started to run really rough and was back firing badly on deceleration. While riding the bike, it would surge and sputter while holding the throttle in an evenly open position. Finally the bike would not idle. I...

Hello fellow berg riders, Has anybody fit a recovery system on a 2011 FE-570? Does anybody manufacture one? Thanks in advance for your knowledge and experience. Waters

Hello people, I've posted somewhere else in the electrical section on my continuing woes with the inadequate e-start performance of my 2002 FE400e... in short, it didn't e-start hot or cold despite all the suggested starter upgrades and perfect mechanical condition. Many modifications later I...

2008 FE 450 My elecric system is falling apart. My headlight is flashing when I turn the handlebar. The elecrtic starter is'nt working. I belive it's the cabel that's running on under the tank to the front. I've done repairs there before but it's not holding up. Any ideérs how to make this hold...

What is the max system voltage people are seeing in their system/at their battery with the bike running? There are some interesting LED lights I have found, but their max voltage is 14 volts - any more than that and they blow. I know some bikes have charging voltages that go above 14 volts (I...

As the heading says... Would it be possible ti fit an FP system (headers and silencer) from a 2002 550 to a 2004 650? I was told that all the fittings to the frame is a complete match but that the cylinder height is different, which may cause some difficulties with the headers. I have some...

hej, i am new here and this is my first post. i own a husaberg 450 fe 2009! my mechanic did tell me to put a cooling system,,,and i want some ideas from some husaberg riders! i do most trail ride and near the summer the themprature is hi......20-30 c! what is the best to do to cool it down...

Hey everyone I stumbled on this beauty of a site while trying to find some service info on my Berg. I have an 08 550fe that decided not to start the other day during a ride and i had to bump start it. I tested the battery while the bike was running and it produced 12.31 volts at idle and when...

I have HUSABERG FE 600 year '99 problem - no spark. maby broken coil system but maby stator. qestion...whats parameters for test coil system and igition stator? Ohms? regards Raivis Latvia

complete after market exhaust for sale will check on make open to offers any questions call 07500904547

I was wondering whether anyone has had the time to look at the new 09 EFI system yet? I understand it's the Keihin which is based on the Honda PGM-FI but I was wondering how they've implemented it - i.e. is it simply MAP and alpha-n - and what other functionality is being used? What size...

I've ordered the 21' tubeless system. Instead of running a heavy duty tube the wheel will be lighter. No more pinch flats and if you do go flat the bead stays on the rim. All this sounds good but it seems strange to ride around without a tube. I'm going to give it a shot on the front and if all...

does any body have any experience with this vent system? http://www.pcracingusa.com/carburetorventsystem.php . seems hard to go wrong for $18. bogged the bike out twice, once each way crossing the pack river this weekend. I'm also going to try out vikings trick of putting a shield in front of...

the early berg lubrication system relies solely on a reed valve in the crank case that evacuates on the down stroke ,then it closes on the up stroke ,but any lubrication the crank receives comes from what little bit of oil the clutch can throw up toward the oil screen that sits at the top of the...

Hi guys! 1st post here and allready asking for help.. Just got -08 Husa to garage (Old bike was Husky 510TE) and full ti Acra to be mounted next week. I am now changing jetting from restricted setting to FS650C spec but started to wonder if someone knows what would be good base jetting...

i've managed to fit the doma on my husaberg. it is now known that the 650 head is over an inch taller and upon trying to fit the 650 system i thought i'd had it! the problem being that the "sweep" of the pipes around to the right WAS over the ignition cover and with the 400 it would have...

I had always thought that the factory just forgot to install the kick start activated decompression system in this bike. I just assumed that someone forgot to drill the hole in the case by the kick starter for the lever and the next person down the line just let it go. Now I am not so sure. Upon...

Hey all, Sometime back, in this thread, you might recall I was playing around with an exhaust and silencer system with the plan to create one that was both quiet and produced power. It has been a real challenge, that's for sure! This afternoon I went down to the dyno to put the best...

I have bought a keihin FCR41mm with TPS from ebay. I bought it for my FE400 which was previously equiped with a Dell orto phm38 This dell orto does not have TPS, so my CDI does not have a TPS 'connector' I think? Should I buy a 'Husaberg certified TPS CDI unit' or can I modify my current...