After dealing with a back surgery, my 2011 FS570 sat for several months without being started. Now, it will only start cold with a tiny amount of starting fluid sprayed between the seat/air box. Gas is fresh, battery is brand new, I'm using the cold start lever. Once the bike has warmed up...
Hope somebody can help.
I had to solder the 4 red and white wires in the wiring harness under the fuel tank .
All went well pump primed everything good ,started up no problem .
I thought i would make sure it was a good soldering connection and soldered the wires well.In doing this i did not...
hello everyone, this is one of my first posts here. i have a 2009 fe450 that needs a little bit of throttle to start when the engine is warm (still might take two or three goes). However when it is cold, the berg fires up right away at the touch of a button... i have read somewhere that this...
Hello People!
I have been working on my New husaberg fe 400 2000 for some months now. Its soon time for the road and hopefully it Will withstand some commuting. I have some minor problems though
I
1. The electrical start wont start the bike when its cold. Is this normal? Starts pretty easy on...
Ive looked through a few posts and cant make heads or tails of it. Im hoping some clever sod will know what im doing wrong.
I have a 2003 'berg 501. Its a struggle to start, took me 3 hours of fettling to start it yesterday and it was fine. Would start on the button without issue. Went out...
Hey guys, I just installed a new battery along with a few other parts (healight tail light), and I have a no start now. No spark at the spark plug wire, but smells like gas at the tail pipe.
Any ideas where to start looking?
Hello everyone!!
Working on this 400FE and it has a no start problem. It backfires into carb, no matter what. Problem is also with the ignition, I cannot get the marks aligned. I set the piston to TDC, and the mark is way off. there are 2 marks on the rotor, and it has to be on the left one...
This Z Start auto clutch has maybe 15 hours on it. Decided to sell the Berg and go back to my 300..Purchased new 2 months ago. Model RMS-827
$450
email: [email protected]
I'm at a loss. My 07 won't start. Occasionally, after what feels like hours of kicking it, it will catch and run for 10-15 seconds with a slow 8 stroking idle.
Here's the back story. Bike was running fine, jetted to the doc specs. I replaced the stock fuel tank with a used boss tank. Did a...
Where should I start. Went riding about a month ago. Went to start my bike a week ago wont start figured it was the plug. Now I find out there is no spark. I want to go riding Tuesday! I'm pissed right now. All wires are connected.
I want to first start by saying, I have 2 bikes. A 2004 FE450 and a 2003 FE650. The 450 starts on the button with great pace. Easily and all the time.
The 650 is a dog, it struggles like no tomorrow. It will start on the button but ive always felt the battery is nearing its end. A yuasa...
Hi i'm new here, i'm from Poland sorry for my bad English. I've always been a big fan of husabergs and recently got one. It's a 1998 Fc400. It's not perfect condition but its not so bad (i earn some extra money fixing friends bikes). After i bought it, i went for a 1 trip it was fine, starting...
Okay guys
Im pretty new to all this dirt bike stuff.
Got a FE650 '04 afew month ago. Love the bike.
BUT I CANT START IT :furious::furious::furious::furious:
So this is my 1st dirt bike (last bike was a honda h100) so im sure its me and not the bikes fault.
I can normally start it...
I took my bike out for a run. Was driving around 40 minutes, then i stopped to talk with some peoples, and when i tried to start it again, it just makes a click sound from the relay..
Anyone know what it can be? Used start cables directly on the starter, so i got home, but can't figure out...
Hi
So i have pretty much pulled half my bike apart looking for a bare wire or something that would be causing a short. Basically what is happening is each time i hit the start button it will blow fuse #4. From what i have read in the manual fuse number 4 is for the speedo, blinker, horn, brake...
Hi,
Thanks for reply Taffy, I have checked out both carb and the valves look to be seated ok,put in fresh fuel and left off the exhaust headers, go for start up and popping out of ports and a lot of excess fuel blowing out as well.Could the problem be valve timing out?
Any thoughts.
Hi,just joined I need help please.
I have a 550 04 model went for a ride yesterday,all was well until 6 miles from home the bike started to splutter then stopped.Got the bike home removed plug
to check spark all ok,took off carb fuel pumping ok,checked out valves they are
ok.I even put a drop...