start

I have completed the assembly of my bike ( FE400 1998 ) that i took apart 10 years ago but when trying to kickstart it it just won't start, sometimes i do hear a small bang isch sound like if it wants to start, I have tried using the choke but it makes no difference and i have also tried...

hello , im going to go have a look next week at a 2008 fe550, the owner says the bike burns oil on start up, but goes away when warm mentioned vales seals, do you thing it could be just seals or guides as well? or even whole engine rebuild? its all the info I have at the moment! thanks...

My 2010 fe450 starts ok from cold. If I stop briefly or stall whilst out and hit the starter it fires up. If I stop for a break or 're fuelling for a few minutes it cranks real slow and won't start. It will bump start straightaway and runs fine. If I wait a few more minutes and try it spins...

I have a used Rekluse Zstart Pro part number RMS 826 for Husaberg model years 04-08 325.00 includes shipping conus.

Hello, y have a 2010 husaberg fe 450 and after the winter my bike is moving forward in first gear when the clutch is pulled and y can started in gear when y press the start button the bike is moving forward with the clutch pulled, y change the oil ( motorex 10w60 ) and y opened the clutch cover...

Hi can anyone tell me should a FE501 start from kick starting it with a flat battery

I ride a 2007 fe 450 and i was wondering how reliable the electrical start is supposed to be. I have a brand new battery and the bike has under 350 miles. I was told that I should expect to kick it 90% of the time because the electrical start is unreliable. Is this true? Thanks

I bought this bike from a friend. It ran when I bought it then after changing the oil it ran for about a minute, shut off and has not started since. So far I have: Swapped the entire fuel system from a running 2010 FE450 tank fuel pump/filter fuel rail injector Fresh oil change Clean air...

Hi, I am having a problem with my bike. Yesterday it fired up on the first kick like it always does, but when i took the chock off it stopped and it will not start again. I changed the sparkplug and still nothing. There is fresh gasolin on it and oilfilter and oil was put on it 2 days...

Hi Guys, I'm trying to help a friend with his 06 FE450. it will not fire. There is good spark. There is fresh fuel and a clean carb (even tried some quick start fluid). I'm looking at compression next. A normal compression test is useless due to the decomp. I have pressurized the cylinder...

As the title sorta says, i have a 2010 fe390 that cranks over really well, but there is no power to fuses 1, 3 & 4, so no fuel pump or lighting and wont start. I have searched on the net and tried a few things, like put power direct onto no 1 fuse and the pump primes up no issues. I also have...

Taffy, whats up w/ bump & spin free on the elec. start on my 08'450 ? I looked at your site for maybe a spring/kit kinda thing but didnt find anything. The decompression is not hooked up on my bike if that makes any difference. It kicks & fires right quick. Thanks--Proflow

I replaced the stator on my 2013 fe350, and bike ran well on day 1 of a 3 day ride. Tried to start with e start on day 2 - bike starts first time but after start, starter motor gives a high pitched whirring noise. ( like it’s spinning overtime) and then just a click. I shut bike down and...

I was out riding my 2013 Husaberg FE450 today, as normal the bike was running fine. It was my first ride after the bike had sat for about two months, I had turned it off and on about 5-6 times during the ride to stop and chat to my friend who was also riding. The 7th time I started it and it...

Hi, My recently new to me husaberg FE450 2010 wouldn't restart after a 20 minute break - starter would turn the motor over but bike was dead - no F1 light or fuel pump. 2 days later i got a 4wd 25 kms into the park and recovered the bike that still wouldn't start. After the bike was...

Having problems with a 70 degree 450 Engine cranks fine but fuel pump doesn't run and there is no spark Kill switch ok Fuel pump ok (runs when 12v supplied) FI light flickers when cranking New plug Battery ok and good earth Fuses ok Any suggestions on how to proceed? Bike will...

Ok this is bike I need to get going . I keep checking things off but still won't start I sent carburetor to Taffy for easy start mod , beffy starter installed. new Spark plug , new battery , starter clutch , decomp spring . I've had bike running. With kick when I 1st got it but never easy...

Hi, I have a old 1993 Fe600 and i was thinking of getting a electric start to this, but i'm not even sure if its possible? Are there anyone out there that might have done this mod, or have any tips and tricks? Thanks in advance!

My Husaberg 390FE 2011 does not start. I only have 5v in the switch to the fuel pump when I press the start button. But the starter engine is spinning as it should. Anyone who has been involved in something like ?? The motorcycle has been around 70 hours. Thank you for all the answers. / Daniel

Hi, I have 2007 FE550. When the bike drops on the ground, it does not want to start with the e-starter as if the one-way bearing does not engage. I start with the kick starter and after 15 minutes of engine operation I can easily start with e-starter. The one-way bearing is with tight spring...