sprocket

I have an 2008 FE 450 that has 15 hours on it and has developed a leak at the countershaft. From reading the forum the cause seams to be the o-ring behind the spacer. My question is how tight a fit should the sprocket be on the countershaft? Mine is real loose to the point of wobbling a bit, is...

has anyone ever tried to fit a newer steel type of upper cam sprocket to a camshaft in a 1996 FC bike.they both are 30 tooth.is this project possible?dan

Hi there,any tips on replacing my front sprocket oil seal ?(2003 FE400E) 100hrs,

I'm looking for drawing or dimensions on the rear sprocket for my bike... Anyone knows where to find? How big is the centrum hole?

I have not had my Berg long but I am learning all the time. Anyhow, I took the right hand frame guard off to replace it with a new set and I noticed that the front sprocket has some side to side play in it and is held in place by a circlip on the splined shaft. Is this meant to be like this...

what do you guys think this would do for a 05 fc450? the stock 13 48 seemed to be a little tall in the slow technical and second gear on the big climbs seems to bog out at all the wrong times.

I was wondering if anyone can shed abit of light on what different sprockets sizes will do for me? recently got my first supermoto and thought i'd sign up on here. Anyhow i was wondering if it would benefit me to change the sprockets, it's currently got a 16 on the front and a 45 on the...

I was looking through some of the posts and the DOC and I see people talking about changing there alloy sprocket to the 2003 steel sprocket. I have a 1999 FE 501e and I am in the middle of an engine rebuild and this engine has the alloy cam sprocket with a Regina chain. Is it possible to fit the...

I have a chronic 08 countershaft seal leak, changed it twice. My front sprocket wobbles it seems not to be wide enough to hold the o-ring flush inside the spacer.. whats the deal . Is the front sprocket suppose to be a tight fit or what.. Anyone elses 08 loose/ leaky ??? bought the bike...

it seems that i can only get a 13 and 14T front sprocket according to my parts books for husabergs? Z12 is the spline code, 520 the chain. it's 12mm wide and the other dimensions are 3mm spline - central sprocket teeth - 3mm of spline. code is JTF -823 -13/14. so taking advice from the...

Someone tell me the standard front sprocket size for a 550 (2007)

anyone take the alloy cam sprocket off the earlier models and thin them down similar to steel so the decomp can get in closer? i think we're talking about 2mm out? regards Taffy

Hey guys I searched the site first and checked the the repair/mantainence docs and haven't been able to find how many foot lbs/ newton meters you are supposed to torque your rotors to or your sprockets, also the brake master cylinder for my repositioning bracket. Does anyone know these #'s off...

Oh wise people from berg land... Is it possible to run a 16 tooth front sprocket on 05 Fe550?

On the cam sprocket the is a pin used for stopping the auto compression release cam. Has anyone every had a problem with this pin falling out of the sprocket? The pin only looks to be pressed in, if there is a history of this pin falling it may a good idea to TIG weld the back side of the pin...

I find I'm lugging the engine in second gear more than I'd like on tight trails. The stock gearing is 15/48. One tooth lower in the front (14) would be fine, but I prefer to go larger on the rear. Keeping the 15 on the front will make for a longer life for the chain and sliders. I think 15/52...

I have a quick question: Is the rear sprocket on a 03 FE400e the same as a KTM rear sprocket? I want a 50 tooth rear, no husaberg dealers with a few hundred miles. Can I walk into my KTm dealer and order one?

hi, the parts manual shows an 02 camshaft sprocket as a 'unique' number. does anyone know what sprockets will fit? steel or aluminium shouldn't matter, correct? i thought they were all the same but the manual says different. thanks tuts

whats standard sprocket size on fc 470 02.??? i am running a 42 on the rear with supermoto wheels and its got to much top speed and no acceleration, only wheelies of throttle in first. what do you guys suggest??

Does the ktm exc or lc4 sprocket fit these bikes(front and rear). Is the front sprocket the same on 1998 and 2004 Husaberg.