sprocket

I'm a new owner of a 2011 FE390 and a new member of the forum, and I want to change my counter sprocket from a 13 to a 14 tooth. Has anyone done that? Is there enough clearance for it? Because it looks pretty tight as far I can see. Thanks for the help.

Does anyone know if Dirt Tricks makes counter shaft sprockets that fit the 2007 FE550E ? As per their online catalog, they do not. If yes, please post the part numbers that fit. Thanks.

Hi, to complete rear wheel refurbishing I renewed sprockets, chain and chain guide as well. Maybe this is helpful for someone... Since the old chain guide is somehow pretty worn I decided to order a new one (pics below). Same with the sprockets. I opted for the original ratio I ordered a...

The supermoto saga continues! My rear sprocket is stuck! I've tried Allen keys, minced a few and now holes are deforming. Tried putting on a spanner , nuts are all deforming. If I grind the Allen bolt heads away will the rest come off or are the wheels threaded? Never ending this! Sent...

Cash drive Vs counter saft failure. The Moxsprocket cush sprocket Earlier This month New Zealand company Motomox released to the public their Moxsprocket. It's a cush sprocket, that has been undergoing hash testing over the last 12months and has performed exceedingly well. The it's a high...

Just picked up a 2010 FE570 that had a 13 tooth front (50 rear). I happened to have a few front sprockets from my 2009 450XCF lying around and went to fit a 14 tooth. I discovered the KTM version is a few mm's wider than the one that was on the Berg. Is this a normal occurence? It fits on just...

Only a half dozen rides on this 47t ironman sprocket. Great condition. $40 plus shipping pollo

* *

I'm usually very weary of non-OEM sprockets as to not strip the spline on my bikes, but somehow a JT sprocket for KTM has done this to my bike. Frustrating, because there was no feedback or warning, just suddenly no gears and in the middle of nowhere. Got out and home now, looking at the decent...

hello! I basically put the lower cam chain sprocket the wrong way around and it slid all the way to the bottom with one or to gentle taps, preheated to 200C. There is maybe 2 mm room between the teets and aluminium. No chance for the puller to reach in. I did get some steel wire around the...

I just bought a new counter shaft seal kit "to fix some leaking oil" and would like to swap out the front sprocket at the same time for the SM setup. Was wondering what gearing everyone was using when they covert the Fe's? Also, like I said I bought this Kit P#"00050000941" but it comes with...

Hello all, I bought a sprocket for my bike, but I didn't read the fineprint... it doesn't fit. Mine for sale is a 14 tooth (stock pic of 13 tooth below) I have an '05 Husaberg, but the sprocket fits '09 and up. Brand new, I took it out of the package, realized it didn't fit, sprayed it...

Hello all, I currently have a 45T sprocket on the rear of the '05 FE. I went to put a 48T (or was it 50T) on the rear, but it didn't look like it would fit at all with the chain guide. The chain guide also appears to be adjusted to its "largest" setting. What is the largest rear than can fit...

Hello, I just bought a ktm front sprocket for my bike (05 FE650), but it doesn't fit due to different spline profiles. I guess I messed up. How do I buy an aftermarket sprocket that will work? Not sure what it would be classified as... Thanks.

Any of you guys have one laying around collecting dust you'd care to part with? Could use a kickstand as well. Thanks! Bruce

Hi guys I need your help. I had my top timming sprocket badly damaged in by engine so I have bought a used one to fit in my engine. But... this one is from another model (do not know which) but the outher shape and qty of tooths is same. The only issue is the inner diameter - I need...

Hi. I just got my newly bought FC550/4 from service. I took it for a little spin, and was suprised how fast it was running, even with no throttle, on 1'rst gear. I discovered that my bike has 38 teeth on the rear sprocket and 16 on the front sprocket. Thats for high speed I think. I know that...

Hi all, What is torque spec for rear sprocket screws, can't find it in 2003 manual. If it's M8 10.9 it can go to 33 Nm, right? Thanks

Currently I have 13/42 sprockets on my 570. After dropping the front from 14 to 13 it still runs high. Riding tight single track, it seems like first is too low and 2nd is too high. My plan is to purchase new sprockets and chain so I would like to make sure that i get it right. I'm not...

I'm looking for a spare cam sprocket for my 650.part number 80036011100. can anyone tell me if there is a ktm cam sprocket the same.as I know that some ktm cams work great in these motors with water pump shaft cut off. cheers peter