springs

Just to let you know that I have had some sprague springs produced that are of superior quality to the ones fitted OEM. as previously said on UHE, the springs are inferior from the factory and don't expand between each part while over stretching in the gaps. the ones i've had made are...

hows it, Im 200bls getting my suspension sorted on my fe570.. Question is.. if i get the correct spring for the shock to be in me sag parameters do i change the ones in my forks too? They seem quite plush n soak up everything i throw at them so i would of thought not?

I got some 4.6 wt race tech springs to replace my standard springs on the 2008 berg. They are apparently the right springs for the bike. I notice that the race tech springs are 3cm longer than the standard WP springs. Has anyone else noticed this? This will clearly affect the preload.

I have a chance of buying KTM EXC 01-07 valve springs for 6 times lower price than normal and i was wondering if they fit on Husaberg since i heard that Husaberg tends to suffer from broken springs. Do they fit?

ok i'm swapping out the springs to some heavier ones i have on the shelf. fork springs are fine but the rear spring is a different matter. its a ktm spring that ive used on several bikes. and on fitting it i realised its actually 2.5mm wider that the standard husaberg spring so the...

Hey all Any one know for sure what the 2010 390 has for fork springs in it? Thanks Looki

I am a 200lb rider... pretty much out of adjustment on forks I think heavier springs are the answer. Anyone know where I can get these? -- For Hare Scramble setup I already have a heavier shock for a 200lb rider for Hare Scramble setup... just need the fronts now.

Does the new fe 390 run a progress rate spring in the front and rear? Thanks in advance

Hi, Finally I prepared a spring test set-up with a 200kg load cell. In this test, I measured the spring force on KTM DVSKs (part#83036028044 and 59036028244) and contrasted with husaberg conicals.I knew KTM full set(4X) ATV DVSK(part#83036028044) is the same as 1X racing bike...

Just an FYI for whoever may run a search for WP 50mm Extreme fork springs in the future. It seems no one carries springs for these forks anymore. They were only used on 1997-1999 Bergs. Race Tech has them listed on their website but don't have and cannot get them. Going through the KTM...

Hello. Bought a 501 -96 in parts and it have dual valve springs, can i use them on my 501 -99? The cylinder and top end are the same parts as on mine -99 but the springs are dual. Are there anything fun i could do wíth those parts, smaller cc or even more cc? My bike is on it`s way to...

Hi, its finally happened after all this time my beloved 2007 650 FE has failed me at a race, with 10,000km on the clock most of these done at Australia's major desert races ive broken one of the original exhaust valve springs and she spluttered to a stop, My question is has anyone tried...

I got some stiffer front springs which included a few shims for proper length.will there be shims under the stock springs ? and if so how would you fish them out? I was hoping to take caps off remove stockers ,confirm oil level,and drop new ones in and be done.

I need to order some .46 springs for my fe450 2009 husaberg Anyone know what the wp part number may be for a set of those springs Thanks in advance

Hallo. I was at the local mxtrack today and had my first testride, and i didn't crash, probably riding to slow :lol: maybe because the suspension was to soft so i didn't want to push to much. The springs seams to weak stock Fe450 08 susp. so i am 25kg to fat for them, witch spring should i get...

I hope it is okay to share upcoming ride opportunities here. If not, please correct me. I'd hate for someone with the chance to ride this one to miss it for lack of information. Do you like single track? How about side hill off camber singletrack. Roller coaster action anyone? This trail...

Have bought a 1999 FE 600. Front: WP Extreme 50 mm Rear: PDS Shock I want to use them mostly on a cross track, want a suspension stiffer than enduro, but not so stiff as a cross bike. something in the middle (cross country) on all accounts I am heavier as the normal 78 kg rider. I...

Hi folks, KTM 400 and, maybe several other models if I recall, are running '01' profile camshaft. Nonetheless, they are also running dual springs with '01' profile.Then if we assume '01' Husaberg camshafts and '01' KTM's share the same profile, it should be possible to use dual springs used...

As a casual rider and somewhat old too do I really need the double springs instead of the stock which have held up for 180 hours? They are 6 times the price........... 8O Talk to me oh great taff

I came across these interesting videos and thought they might be of interest: Valve spring at 7000rpm http://uk.youtube.com/watch?v=i_NpzU4pGjc Valve float: http://uk.youtube.com/watch?v=_REQ1PUM0rY I thought the valve float video was particularly enlightening. Enjoy, Simon