springs

I’m in the middle of putting new fork springs on my buddies berg. The springs I ordered are 43mm x 505mm which from what I can tell matches the service manual for the FE models (open cartridge forks). The weird part is the springs that were in his forks measure 43mm x 485mm, which seems like...

Hi! I bought a new old Husaberg slipper clutch for my FS 650, but it is missing two of the four opener springs , anyone who has those or knows how to get them ? I attached picture of the spring, the parts lists and picture - #5 Opener Springs , and picture of the slipper. Thank you!:)

Hi guys, I've installed the KB kit #96-96000 on my 06' FE650 but I can't get any valve clearance. :eek: Per a previous post, it seemed like no modifications were needed to fit the kit. However, with or without the spacers in the kit, the rocker arms are touching the valves allowing no...

I weigh 255 and need heavier springs on my FE650e. I called Slavens Racing and they only offer springs for 2004 up. Does anyone have any experience trying to use 2004 up springs on a 2002? The sales rep I spoke to gave me canned ID/OD answers but no specifics on if they can be made to work...

I got lucky to score a used but decent shape side stand for my FE550. Picked up both springs, bolt, rubber band and C-shaped hook. Can someone please post a pic how it should be installed? Thanks! Christian

Hi there folks. I just recently bought a lovely FE 450 e 2006 in great conditioned with all servicing done etc. It runs great. There's just one problem. The springs in the little devil are rated for someone weighing 70-80 kilos. I'm a lanky fellow and weigh a whopping 62 kilos. I can't...

I am looking for a heavy duty clutch spring for a 2011 fe 570. Who makes just a spring kit?

WP Suspension Front Fork Springs Suspension Info This suspension information is for the 2005 Husaberg FC550, and is good for all Husaberg motorcycles.

I'm looking to pick up the stiffest fork springs I can get my hands on for a 2004 FE 550. 48mm WP I believe.. Anybody out there have a pile in the back of the garage that have something like that in it? Thanks! Brandon

Hi, Trying to locate exhaust valves and springs for 1999 fe 400 have not had much luck. Thank you Ray

I was wondering how many people are getting over 200hrs on the single valve springs without going DVSK. I took an 05 FE650 to 180 hrs without DVSK before selling. I also sold another 05 Fe650 that has about 220hrs no DVSK. My 06 FS650 is at 145hrs but the previous owner had 1 spring break around...

Having problems finding this info :-( I have 2 questions: 1- Does anybody know the free length (spec) for the valve springs on the 1991 fc501? 2- Does anyone know the part numbers and/or where to buy OEM or upgraded valve springs for this motor? Thanks, Jason

Came with my 04 Husaberg FC450S. I am only interested in running stock suspension so I'd like to sell these springs. They are brand new and have never been taken out of the bag. Check out racetech's website to see if they will fit your bike and if they are the spring rate you want. They are...

Hi all, anyone knows if clutch spring from other manufactures(KTM, yamaha,..)/models(fe 450,...) fits fe400e 2003 model? Or if someone knows where to buy stock springs for my bike? Thanks.

I have purchased a set of Factory connection springs for my 08 550FE and the springs are different length. stock ones came out at 484mm and the new set is one at 484mm and one at 476-477 mm. Should I be concerned or is that in tolerance? it seems a little excessive and is there a way to work...

Hey everyone I am looking to re-spring my 97 fe501e. Iam 6'.5" 275 so I def need to stiffen it up. I have had some trouble finding heavy fork springs. Slavens lists some for the 98 up wp 50mm extreme forks. http://slavensracing.com/shop/fork-spri ... erg-wpx50/ Will these work in my 97 wp50mm...

Has anyone used the 450 clutch springs in a 650? I have a spare set of 450 springs and tried them lot lighter pull. I have not run them yet as rebuilding motor. i know the 650 ones are a different part number and are .2mm thicker.

Just bought a second hand FE450 2012 and I am told that the previous owner took out the Rekluse and put back the old clutch just before selling it. The clutch has never really been "free" when engaged, even when the oil is hot, there is always enough drag to make it difficult to change into...

Bought a 10 390 Husaberg that was set up for a much heavier guy, Him = 240 Me = 165, suspension done by a local shop. I've resprung it for my weight but it's still too stiff even backing out the rebound and compression. I thought that valving was done by suspension shops to make the factory...

I own a fs570 and I'm pretty happy about the stock wp suspension. But the the springs in the fork/shock from the factory are made for 75/85kg with gear I only weigh about 72kg including gear and I always used the "comfort" setting even on trackdays because the other (standart/sport) feels to...