side

Had a bit of a disagreement with a tree today. Anyone have a Left side (non-cap) radiator for an '09 Berg 570 that they want to sell? Thanks. Brandon

My 2005 FE550e is leaking oil out of a screw hole in the left side cover. It seems to be next to an oil passage on the cover and I was wondering if it needs a crush washer maybe or if it is a bigger problem. the gasket or cover are not leaking they are properly seated, it leaks around the head...

Still fairly new to motorcycles, While in the process of repairing my 98 fe 600s throttle cable blown off carb and vacuum lines falling off, realized there was excessive rattling from the right side of the engine on higher rpms, removed black plastic side cover. three bolts there was some...

Snapped the plastic foot off the bottom of the sidestand (2009 fe450) Can one get the replacement tip only. Does anyone make aluminum ones instead of plastic

I have an 09 FE 570 with 320kms on it. On both sides the covers are already quite scored from my boots rubbing on them. Should this be the case?, there are even some small grooves there, like cuts, has anyone else noticed excessive wear here?

Hi all, has anyone got a side stand they would like to sell as mine broke today! Cheers Freaky

Hello everybody, :idea: I don't like the side stand, the way it flicks back when the load is taken off it, on two occasions my bike nearly fell over, after people checking the bike out, having a sit then jumping off and letting go of the bike only to have it move forward and almost fall...

I am trying to put my 04 Fe650 back together. I was warned about the kick starter shaft. So when I took the bike apart. I made sure that the shaft did not pull out. Or so I thought. When I put the side cover back on the shaft stays free until the very end when I torque the side cover...

hi, do i need a side stand for an mot test in the uk?

can some one post a pic of the bracket where the side stand bolts onto the frame please on a fe modle if there not different thanx gaz

Hi! I recently bought a Husaberg FE550E -04, where the side stand is broken. I decided to rebuild the side stand instead of buying a new one :) Is there a kind person who would like to take two measurements for me on your side stand. See pic.

Hi Little help needed - which side the seal goes in? Picture A www.zone.ee/gigaweeb/seal1.JPG or picture B www.zone.ee/gigaweeb/seal2.JPG

What's the use of that little plate on top of the carb cover? Just to easy access for the needle or can somting else be mounted on there? Stock AP membrame next to a Honda ap membrane

Very rare, top secret prototype... http://cgi.ebay.de/Husaberg-Modell-1-12 ... dZViewItem

hi there just bought me a new husaberg 650 supermoto. :twisted: was riding it yesterday and the spark plug blew out with a bang?? its all fun and games went staright back in no trouble probably not put it in tight enough. how often is the servive interval on this bike i change...

My stepson and I had a great ride on fast rocky trails today and as usual the Berg did superbly, and I had no suspension issue after my weight drop. Actually, being in shape helps, go figure. Anyway, I did had a nice wash, and found myself with my left leg stuck under the bike and before the...

HELP ! I would like to add a side stand for when going street riding... Does the side stand from the other fe650e / usa model bolt onto the fe650c model ? 8O

Ok Since We Got The FCR Fitted To The 400 2 Weeks Ago The Bikes Now Making Funny Noises On The Clutch Side I Think. We've Only Ridden The Bike 2 Laps Round A Field A Couple Of Times Since Fitting The Carb. The Sounds Go/Quieten Down With Clutch Pulled In. My Guess Is The Gearbox Is Making...

Why would I be leaking gas on my left side? for a few months now when the tank is filled and I'm loaded in the back of my truck, when I arrive at the staging area to unload I find a splash of gas on my truck bed to the left side........the splash leaks never happen on the way home in the truvk...

Hi folks, On my FE501e (2004) I ran into a little problem. While riding suddenly oil squirted out of the left side of the cilinder head. I turned off the bike right away. Little research learned that the nut/screw on the left side cilininder head came out. I checked the parts manual and found...