side

Hello, Yesterday I heard a nasty thumping noise while decelerating. Luckily it was only my side stand bouncing off the pavement. It seems that the spring broke off, so now I need a new spring. I looked in the fiche, but cannot remember which combination of parts was present before. Q1...

Hi just woundered if any one can help.Iv got a 650e supermoto that started life as a motocrosser the stand has been modified (shortened) and the spring eyelet hole (or whatever there called) on the stand is in the wrong place.Does anyone have the correct measurement from eyelet to eyelet so I...

Hello guys. There is a seal under the bearing which number is "0625 062013". It was not seems on part diagram. So where can i buy this seal? It seems it is a special seal and i can not find it anywhere. Thanks.

im after a left half of a crankshaft for a 650 2005 to 2008 628 cc, Clutch side. Key way must be usable but can repair if slight damage

As the post says, I've been trying to get my 05 650 back on the road. I went into the clutch side to replace the WP seal. I've been careful to check kickstart shaft, and check for proper movement prior to installing the cover. Plug out of course. When I install the cover and seat the...

Anyone with a 570 fs can tell me the side stand length? Can't bring myself to pay £80 for a shorter side stand. So going chop mine down and make a adjustable one. Thanks.

Does anyone know any measurements for a 2007 Side stand? I have the lower half of the old stand that snapped, But don't have the top part or the springs, And I was wondering if anyone has dimentions for it to I can make a new one Thanks

it's a restrictive procedure and it consists the formation of what’s called a virtual pouch this is a actual pouch and this is a virtual pouch in the sense that it's not divided ok okay and made Nitro Shred separate but its partitioned by this band that is adjustable and can narrow the opening...

This engine has more leaks than a St.David's day cookery contest!:furious: I've finally solved (I hope!) the leaks on the left side of the motor, time to sort the right!;) Can the seal behind the ignition rotor be changed by removing the rotor and drill and tapping the seal? Not looked yet...

Hi guys! I went to my garage to test a few graphics I'm doing for my Berg and as soon as I got there, I immediately changed plans. This is what I saw: Tried to follow it's path in reverse so I could find out where it came from and got more droplets of oil allover: On the frame...

Hi All- I know its a bit of a long shot, but I am looking for ways to extend the fuel range for rally on my 08 FE550 beyond what I get from my Clarke tank. Does anybody have any tanks available, or other good solutions? Cheers! Matthew

Swapping my FX box for FE gears 1 and 2, parts on the way. Wondering which side case to pull off? From the "cutaway photo", it appears I should pull off the right side, is that correct?

I'm doing my regular maintenance on my 2005 fs650e. I have always installed the water pump seal with the spring on the inside. I have never had any leaking problems. I read somewhere that the spring on the seal should be facing the impeller. Just wondering how everybody else installes them...

So I bought myself a MX bike to try and get better bike handling skills, any way I've been riding the dirt every week, and it seems daft to have the SM bike sat in the garage waiting for a track day to come round Does anybody have a rough idea of what a 2007 550 is worth?

Looking for a side stand option for a 01 fe650. Mine has the mount on it. Are there any options? Has anyone fitted the trail tech for the KTM?

Just bought a Diderot stand for my berg wondering how all the springs etc go? It Came with, Stand, 2 springs a bolt and a hoop shaped thing? Pics would be greatly appreciated . Cheers

I'm checking the valves on my 2005 FE550 and am taking off the ignition side cover to turn the rotor to TDC. How much oil will there be in this side cover? On other makes of bikes I've had there has only been minimal oil on this side with it coming through a weep hole, so you didn't need to...

I have a 2005 fs650e and I fitted it with some dirt tires and went to the local mx track on the weekend. upon my return I noticed some oil leaking from the rear engine vent tube (no worries) easy fix. but I also noticed some oil came out of the weephole on the right side of the head. I have...

does anybody no were i can get a new side stand for my 2005 fs 650 e supermoto from and how much as this snapped last week and the bloke who welded it did so in the wrong place and now the stand wont work it just keeps pushing the bike forward and of the stand cheers greg

I have an '05 FE550 and was out trail riding today on some pretty gnarly rocks - the shift lever got bent into the left case and easily scored the magnesium alloy case cover. I'm wondering if anybody makes a case guard for these? (when I got home I ground the sharp edge off of the shifter...)...