side

Hi all, new member from Oregon, US, here. I’ve recently purchased a 2005 FE550 and it needs a new kick stand. The stand that was on it was a badly mangled ktm stand. It was in such rough shape I cannot tell if it ever actually fit well, like the factory stand. Unfortunately, I cannot seem to...

Hi guys, I am making heavy duty sidestands for our bikes. They fit to 1989-2008 Husabergs. The wall of side stand tube is thicker than OEM and bottom part has greater area. I made them in two lengths to fir FE and FS bikes. If you are interested please send me pm with the information if you...

Went for a nice long ride over the weekend. At the beginning, everything was nice and clean. Then I started to notice a mist of oil on the right side of the engine. It was VERY difficult to pinpoint the source of the leak. The entire right side seemed to have a coating of oil from the valve...

Wanted Husaberg 97 Side panels and Front Mudguard Flo Yellow , Prefer New but good Used will do. Thanks

hallo, i?m looking for the side stand of my fe400 my 1998. if anyone have one, complete with springs, please contact me. max

What function do those 2x longitudinal strips of foam on the frame do? The parts fiche says it’s they’re “tabs for filter protection”. Not clear what that means. I took mine off when I sandblasted and powder coated the frame. They were torn and dirty, but I kept them as patterns to...

Gents. New member. Picked up a 2004 FE450 yesterday. I’m after a Side Stand for it. Stand, springs, c clip and bolt. I can get the service items locally but I see the side stand is a NLA part. I’m located in Australia. But happy to get one shipped from anywhere. Thanks :) Steve

Is this the correct way to install the ntn bearing? The side with the lip on facing the crankshaft?

I got lucky to score a used but decent shape side stand for my FE550. Picked up both springs, bolt, rubber band and C-shaped hook. Can someone please post a pic how it should be installed? Thanks! Christian

Please help and point me in the right direction. My 450 sounds noisy especially on the left side of the engine. The noise sounds kinda like a bearing noise (what I can remember from two stroke bikes with bearing problems) Where do I start looking? Clutch, valves, timing chain, .... or the...

On a 2013 TE 250 installing the right side cover prior to the clutch cover there are 2 moves by hand parts behind the power valve area. I can not find any pics or how to align these 2 parts so cover sits properly.

I can't get the left hand engine cover off. I've removed all the bolts The water pump cover The water pump impelllor The kick lever The kick rubber seal. The gear lever Gear lever seal It will move around the top and the back but seems stuck on the bottom front area? Any advice very much...

One last Husaberg sidestand left over , will not be making anymore. All lot sold only last one left. Billet made solid very durable not like oem which break off. This is for all supermoto berg's with 17inch wheels ( low height version ) Bargain price 50 euro + 15 euro postage under tracking...

Husaberg 501 1988-1995 Side panels | eBay

hi all, currently awaiting carb bits so whilst the bike is off the road I'm thinking ill do a few bits inside the left engine case. its mainly to put a new kick start spring on as well as a new sledge. i think ill have a look at the selector forks whilst I'm in there and see if they...

I have a 2001 Husaberg FX 470e and it continues to overheat after idling in place for 10 minutes or more. The bike I believe is jetted properly I did the conversion to a keihin carb (FCRMX 41) with the suggested DMS needle and suggested jets. It runs great and starts very easily but when left...

I have a new to me 2014 Husaberg FE501 and I installed a Tral Tech digital temp guage. TT technical support told me that the only sensor that would fit this bike is the fin mounted sensor so that's what I ordered. I really would like to have the sensor at the hottest point but really don't know...

Anyone know where get a promoto kickstand kit for 70deg bikes? All in USA and no one selling in europe . postage too dear buy from USA plus import charges Just saw phone auto corrected title to promote not promoto

I am looking for a side stand that fits on a 2011 FE570. If you have one that is original or even cut down up to 2" please let me know. I have the bike in California, so shipping is no problem.

So as it the title is the a aftermarket stand for the older bergs? I see the Trail Tech ones for the post 09 these look great are sold as been much stronger and are half the of the cheapest OME replacement… So is there a equalivent for the older frames? With a different spring mount can the tour...