setup

Hey guys, I'd like some help with a basic setup for motard as I'm having trouble getting my bike to go around corners fast. From what I can gather so far is it's completely the opposite from enduro setup with the compression & rebound clickers. On my FE550 I have to compression setup...

Hi, I need some help from you guys to get in the final ball park with this bike. Did second race yesterday, a 4 hour with a good mix of terrain inc. woods tight and more open grassland, whoops, hill climbs, mud, roots. Just to update, i am 98-100 kg. with race gear,have gone for .46 springs in...

Guys, I was playing with the odometer on my 07 FS650e and happened to press and hold down the "0" button for 3 seconds with the total km displayed. Up came big letters "cont" and "125" (I think). Pressing plus and minus will change the number, and I'm not sure if it was 125 before I started...

I was wondering if anyone can shed abit of light on what different sprockets sizes will do for me? recently got my first supermoto and thought i'd sign up on here. Anyhow i was wondering if it would benefit me to change the sprockets, it's currently got a 16 on the front and a 45 on the...

Hello Fellas, happy christmas got chance of a 08 FE 450 and although ill be doing a few enduros on it, my main use for it will be motocross. Any good tips or known tricks for adapting to be more comfortable for motocross than enduro? All the road going kit will be off straight away, i was...

Hey guys. i put the bike away for winter now and finally have time to setup the suspension properly. guess i would have had time in the summer, had i been able to stay off the thing! anyways, my 07 FS 650E has a shock spring 88-250 and im assuming the fork springs are also standard...

Took possession of the new 08 FS650 nearly 6 weeks ago now & have had a few problems with the suspension setup as stock. I've got 300kms on it now & have backed both the front & rear compression clickers nearly fully out & still feels like I'm riding a brick. I've done the static & rider sag so...

Bike setup so far: Enduro Engineering radiator guards - (450 KTM) note: throttle cable housing that is bolted to frame on right side must be shortened - cables will fit under braces but housing will not. Enduro Engineering billet rear rotor guard (450 KTM) Enduro Engineering billet odometer...

Anyone remember where to get the Dual Battery kit ? I am trying to setup dual batterys on my FX470e....just one more try to get the "e" to work......I have the batteries and wires.......need the upper tray. Heath

The Husaberg manual suggests that I set my bike up for 30 mm of static sag. 90 mm of rider sag. I am currently running at 27 mm static sag 110 mm rider sag. My suspenation guy thought that I should be shooting for 130 mm rider sag. But the bike seems to have some problems on...

Hi would anyone out there have the setup for a keihin fcr 41 for a berg fc600. The bike is starting and ticking over erratically but when throttle is opened, stalls. Any help would be greatly appreciated.

Hi Would any of you guys out there no the setup for a Mikuni TM40 pump carb for a 1995 Berg fc600. Have just aquired the new carb but when attached to the engine causes back fire through the carb. i know that this relates to fuel starvation as when I attach the old Dellorto the engine runs...

Hi All I just recently tried out long track racing for the first time & can see myself getting right into it My standard setup (05 FE550e) was OK rear end was bouncing on slides so i adjusted compression and it was a lot better I was thinking of lowering the bike 10mm on rear shock (...

Well I just stripped my carb to see what's there. I have :- Main jet - 185 Needle jet - 270DR Needle - K51 Needle clip - 2 Pilot jet - 35 Throttle slide - 4mm Choke jet - 45 mixture screw - 1 turn out #9980 idle emulsion tube is missing !! The bike runs pretty good but i do have...

I would like to have an mx wheel-tire setup for my fs650e so I can go offroad, the only problem is that the radial brakes have to much stopping power in the mud. So the front slips to much. What can I do? It's a 2007 supermoto.

Hey All, As the title says really. This is not a document intended to replace the hard start guide or anything in the Doc. It is meant to compliment them by giving a specific answer to specific questions relating to the e-start - that always turn up on the site - and a specific step by step...

OK folks, I have just installed an e-start system into a 2003 650 and low and behold it doesn't start on it - I'm not totally surprised, mind you. Now the engine is set up impeccably - stator works fine and the readings off it are fine. Valves are adjusted to spec and the engine is mint...

Hi Bergers, As noted elsewhere, I hosted a suspension setup and tuning weekend with my mate and suspension genius Frank Pons at home this weekend. We did 8 bikes this weekend, including 3 Bergs, a 450, 550 and 650. Joe had had his 06 550 for a few months and not ridden it much, about 15...

Hi, looking for some advice from those who know. I now have my '07 FE650 rallye all built for the Australian Safari in 6 weeks time, just need to get the suspension set up now and she is done. With all my riding gear, bumbag with tools, full Camelbak etc, I weight in at 110kg The bike...

I've just purchased the above it has 880km (550miles) and has been sitting in a dealership for the last few years waiting for someone to install a new clutch basket. For the last 6 years I have owned KTMs of the RFS variety and previous to that I had various Husky 410s, 510s and 610s. I've...