setting

I’m having problem with User Setting Tool. It cannot connect to the ECU. The software is connecting to the UST adapter, and the status of the software is “Waiting for Commandâ€Â

Have bought a 1999 FE 600. Front: WP Extreme 50 mm Rear: PDS Shock I want to use them mostly on a cross track, want a suspension stiffer than enduro, but not so stiff as a cross bike. something in the middle (cross country) on all accounts I am heavier as the normal 78 kg rider. I...

A new accessory on the official Husaberg website is a user setting tool. It seems to be a plug that connects to the CDI on the bike on one side and through the other side via a usb cable with a computer. It costs a whopping € 600,- depending on the country. Does anyone has an educated guess...

I checked the static sag at the front and have 55mm. Target static sag is 20 - 35mm so I figure I want to reduce sag by 25 - 30mm. Pulled the forks apart and the packing shims measure 11mm. When I re-assemble without the packing shims the spring is tight up to the cap. No gap. This seems...

Hello Gentlemen Berg is still in pieces due to main bearing crash last september.Now i'm putting things back together and have some questions.. I am planning to install SKF NJ206 ACP /C3 HVC058 roller bearings,both sides+weld crank pin to halves.Pictures coming when it is done. Any...

Hi mates, Actually I'm riding the following original carb setting in my 1998 FE 600. MJ- 195 NJ- DR 268 Needle- K51 N. Clip- #3 PJ- 40 8original is 35) SJ- 45 Mixture Screw- 1&1/2 turns Riding altitude is about 2000 ft. I think this must be very conservative setting because I do...

Hi all, I have now made the decision to go with using a 2007 FE650 as my rallye bike for the Australian Safari this year. www.australiansafari.com.au So I would like to ask you some questions regarding your advice on setting my bike up if that's ok with you. 1) what gearing should I use...

I need some help about carburator settings. Today i ment racing my 550 02 model. At first it wouldt start, and i thougt it was dirt in the carburator. I screwed it to pieces, and refitted it. this was not the problem. the problem was dirt and water around the ignition weel. After cleaning this...

Well, Yesterday, I got my head into shape and decided to set the sag settings on my FE550e '05. It took about 4 Hours tops from reading all the relevant looking forum posts here on UHE, and going over the manual, and some testing. I am BLOWN AWAY at the difference that such a small...

I have a 2001 fx470e I cannot find the torque specs for the nut on the upper tripleclamp.Anyone have the correct torque setting?

Right I'll Get Straight To The Point. As We're Sorting To Engine On The FE I Feel Its Time To Treat Her To A Complete Suspension Overhaul. My Dads Weight Is Approx 16-17 Stone Without Gear,Maybe Lighter Once We Ride Regular Again. What Fork Springs And PDS Would You Recomend? What Oil+Level...

Not sure of the setting on the rear axle on my 2003 fs650e. Is it 40 nm or 125 nm? The manual seems to be confusing as it talks about 16mm and 12mm bolts. We believe it's the latter. Thanks Tim