removal

Hi People, I pulled apart the fuel tank and need to disconnect the fuel pump from the hose's it's connected to, I have disconnected the positive and neg wires to the pump, but the hoses look like the are heat shrunk around the barbs on the fuel pump. I tried to pull them off but dont want to...

My first post on here gents... I have a 10' model fe 390 which I think has horn wires hiding under the tank which I want to get at to fit the horn which was removed when the bike was new for racing I guess. How do I get the tank off this bike (it has a cooling fan fitted)? Idiots guide please...

Hi all. After 3 hours riding in muddy conditions my 2012 FE570 started to run poorly. After some more minutes it died and wouldnt start again. Several hours later it started but only runs on idle speed so it seems that it dont get enough fuel. Since the fuel pump is running I would beleive it is...

Hi everyone I have a FE390 2010 and I want to remove all of the smog equipment. I'm not exactly sure what components to remove though. I know there's something in the airbox to plug but not sure also there's a different map to run. I have the map switch already (non EPA map one of the...

Hi Guys, A small delema has risen its ugly little head. The previous owner or some one along the line has been a little careless with removing the Oil screen plug/bolt.. The bolt that holds the plastic screen tube into the bottom of the case's, while doing your oil change's. I was careful not...

Hi, I am picking up my new '11 FE570S on Saturday. Pretty stoked about getting this new bike. I am trying to find info on removal of the carbon canister and any other smog related crap on these bikes. I did this to my '08 WR250R and there were quite a few parts to remove and the process was...

I just purchased my first Husaberg (A used 2008 550). After we got home and took it for a spin it died and will not start due to a dead or very weak battery. I am a little perplexed on how to remove the battery. Any easy solutions to accessing and removing the battery?

Hi All, Over the weekend I somehow cracked the outer clutch cover on my FE 390. As a result I'll need to remove the cover to fix it, will I need to lay the bike down on it's side to avoid oil running out everywhere or is it safe to remove the cover with the bike on a stand ?

How do I remove the fuel tank on an FE550 ? IT WON'T BUDGE !!

Anyone know which way the bolt undose always had a circlip on other bikes.

Just picked up a 2011 FE570 and will be riding it 98% of the time in the desert. Just wondering if anyone has removed the smog equipment and the steps required to do so?

i am looking at removing the balancer shaft from crank cases from a 97 501fe is this worth doing to save a little weight and gain a little extra power or shuld i just leve it in.

I just picked up a 2010 FE450 and I am in the process of adding accessories and getting ready for spring. I have read mixed opinions about removing the screen on the end of the silencer. As I understand it, the 2010 has an internal spark arrester, so I don't need the screen for that. I have...

Anybody taken a shock out of a 99 bike? Cant get mine of the swingarm, took the bolt out and its solid. The shock moves about on the bearing but I cant budge it out of the swinger. Am I missing something or is it just 11 years of sitting there? :( Tried levering, hitting , swearing but its not...

I have had 09 berg 570 for 11 months, looking for info on the positives and negatives of removing the screw in end cap will I have to adjust FI Mapping to suit? Thanks

Had to pull my 2010 Fe570 engine the other day (don't ask!!) :evil: and took a few notes. Thought this might help sombody if they ever have to do it. Should be able to do it in 2 hrs or less now start to finish. Hope you never need it!! :mrgreen: 2009/10 FE engine removal Drain oil and...

Hey all, I am looking for a little guidance. This is on my 07 450. It is a factory bike so it could differ a little. After removing my starter and the gears inside the primary area I have a knock when it runs. It runs fine, doesn't vibrate or anything. When I was pulling the sprag gear I pulled...

I have never serviced forks myself before and the fork cap on my 01 fx 650 seems very tight, any tips on this or fork seal replacement would be appreciated. thanks.

Howdy peeps, from ya bro down under. just starting the big rebuild on my 04 650 an i've got stuck already Tell me. Is there a simple way to undo the balancer shaft nut? (other than the obviouse spanner socket etc). I have got the clutch and crank nuts undone but cant see an easy way of cracking...

Ok, stupid question. Any trick to getting the pin out that holds the rear brake pads in place (2000 FE501) I pulled the little keeper out of the pin & the pin spins, but won't slide out easily. I thought I would ask before I get out the vise grips and hammers. Thanks Dudes ! Later Ron