radiator

Using the video link above, it looks like there is a coolant leak at the water pump. If I am going to attempt this repair, besides part 53 & 54, what other parts should I buy? Additionally, what should I expect? Is there anything worth replacing while I have this piece taken off or something...

Looking for a good set of radiator crash bars for my 2011 fe390.....70⁰ bike....let me know if you have any info...714 248 3632 call or text....beware of scammers people.....

Hi. As a new member in this fantastic forum of Husaberg motorcycles i looking to buy som new plastic for my "king of the open fields" Husaberg Fe 650 2007. Rear fender "Blue or yellow", bot colurs can be of intrest. Radiator protectors "yellow" Left and Right side. Original decal set...

my 2009 450FE has been smelling hot lately and making a wheezing sound. plenty of coolant in the radiator and it doesn't seem to be running poorly at all, but the smell and sound are concerning me. should i replace the water pump? something else? thanks!

Hi! I am building a 650 with a crosskart engine - producing 113whp in engine 93 on wheel...:) On the cross kart they had a large radiator and a large fan. Wondering for my Berg if it were better to change from standard to new 570 setup f.ex - with two separate radiators so i can have to...

I have 2011 FE390 with radiator guards, I bought bike used with these on so I don't know if they are stock or not. I believe these are Husaberg guards, they are black plastic fins. The idea is I guess the air hits the inside of the tank cowlings and push the air in thru the fins. However it...

Any suggestions as to why my fs570 keeps overheating? I've gone for pretty long rides and yet it only seems to happen on the short rides.

Just a quick question. Would the radiator guards off a 2006 501fe fit onto my 2002 400fe??

Hi I was just wondering if anyone has had their rad anodised before and if it's ok to do so? Thanks

I have a new to me 2014 Husaberg FE501 and I installed a Tral Tech digital temp guage. TT technical support told me that the only sensor that would fit this bike is the fin mounted sensor so that's what I ordered. I really would like to have the sensor at the hottest point but really don't know...

Hi All, I noticed my rad cap was not sealing well and letting coolant out through the overflow. I figured it was just boiling over often and even installed a Motion Pro coolant reservoir, but a home-made pressure tester showed that the cap was not holding pressure. The only rad cap my...

Hello all, finally decided to get registered on the forum here after reading and wandering around here for a while. I just got myself a husaberg fe 450 supermoto from 2005. It's and absolute beast, did my first testride today but after 10 mins of riding i noticed there was coolant leaking out...

I am looking for a right side radiator for my 2013 TE 300...or the equivalent from other years.

Hello, I'm looking for a set of used stock radiator braces or guards for a Husaberg FE 450. They are found on: Husaberg FE 390-570 Husaberg TE 125-300, 2011-14 Husqvarna TC/FC/TE/FE, 2014-15 KTM XE/XC, 2007-14 KTM XCW/EXC, 2008-14 KTM SMR 2008-12 Probably on some others too. These fit several...

Hi, Who's had any experience fitting a radiator fan onto these models? I am trying to get away with this as cheap as possible, and have considered trying out PC fans etc. But am struggling to find much information on the topic... Has anyone done this themselves using a KTM fan, or...

Hello People! I have been working on my New husaberg fe 400 2000 for some months now. Its soon time for the road and hopefully it Will withstand some commuting. I have some minor problems though I 1. The electrical start wont start the bike when its cold. Is this normal? Starts pretty easy on...

Hi Guys, I'm going away for easter weekend and i'm worried about my radiator hose on my 2007 FE 550, appears to have a couple of little splits in the end. Would it be okay to use Car heater hose on it? Someone told me that the radiator hose is 3/4" or 19mm, Would heater hose work fine...

Hey guys, I have a 2006 FE 650 with factory rad fan, and have found a full set of black plastics and tank off a 2005 at a reasonable price. I really would like to move to black rather than the Yellow and Blue mismatch. I'm 99% certain that all the plastics and tank will bolt on without issue...

After reading some recent threads I thought I would get a leg up on the summer heat and install a radiator fan on my 450. I picked up the KTM/Husberg kit and it looks straight forward. I thought I would post in hear to find out if there are any tips to make this job easier since the...

hello everybuddy I replaced the radiator and water overflow pipe while driving my spurting water Why is this happening? And I think ididnt spent too much.. Is that right?