needed

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. G

    fe450 misfiring help needed

    hi guys out at the weekend and my friends 2006 fe450 wouldn't quite fire back up after we stopped, eventually we got it going again but it didn't want to idle and was shooting out big yellow flames. we decided to call it a day after being out in heavy snow and managed to ride it home, he's...
  2. G

    2006 fe450 charging/battery issue help needed!

    hi guys, my mates got an issue with his fe450, basically all was well until his main crank bearing went and had to have engine rebuilt, it put a hole in his stator case. he got the bike back rebuilt but we quickly noticed it wasn't charging battery so battery being old we put a brand new one...
  3. K

    Oil change - parts needed? '10 FX450

    Hi, Recently become an owner of a 2010 FX450 and the previous owner gave me a box of parts. I'm planning on doing an oil change. I have an oil filter, have oil screens, but my question is, do I need anything else (i.e. crush washer, o-rings, etc...)? Reason I ask, is while looking at the...
  4. E

    Help needed, husaberg fe 350

    Hello guys, i am a new dirt bike rider and my first bike is husaberg fe 350 , 2013 Today my bike drowned a little on the water( not too long) but i am worried and i wonder if you can help me with any advice what to do.
  5. B

    Help needed

    Just wondering if there was anybody in the Buxton area to help me in trying to get my 1993 fe470 to start any easier Thanks
  6. T

    VIN number needed

    Hello Everyone Am hoping someone here can steer me in the right direction. I went to get my 06 fe450 registered today( QLD Australia) and they would not pass it as the VIN number is partially missing. I had not noticed to be honest. How do i find out the VIN number for the bike. Is there...
  7. K

    Help needed

    Does any one have a manual for husaberg fe/fc 450e 2005, desperately need wiring diagrams. Very hard to get this in Scotland thanx
  8. Whosaberg

    Help Needed - Foreign object in cylinder

    Hi, I own 2010 FE390 (70degree) and am in the middle of checking the valve clearances. I used a narrow cylindrical watercolour wooden paintbrush with the handle down to check TDC via the spark-plug hole while lining up the two marks on the cam chain sprocket. I've done this for years...
  9. A

    A good FS650e near me, advice needed.

    There's an FS650e in good condition near me and I'd love to get it, however my father would like it to be a bit less powerful, I didn't take it on to the road in the test ride, however he did and said it wanted to come up in nearly every gear(it had a rather large back sprocket). What kind of...
  10. R

    Is a Battery needed for headlight, indicators etc

    Hi guys just aquired an 02 650 and has come with no light fitted etc just an led brake light and horn. Now its got no battery and the lad said it never had one. Its come with the original light and clocks etc but if i was to fit this along with indicators would it need a battery fitted as would...
  11. B

    Help needed

    I bought a 2011 Husaberg FS570, and though I have been riding since I could walk, this is a much different bike than I've ever had as well as being the newest. I bought it with about 62 hours on it and roughly 2400 miles, so practically brand new. The first two days it ran beautifully. Third...
  12. N

    Repairs needed

    I have an 03 Husaberg FS650c It runs but it smokes a lot. I took it to a shop and they did a leak down test and they told me that it was leaking around the valves and rings and needed a rebuild. This engine splits down the middle and the shop did not want to try to do the work. Anyone know of...
  13. W

    FCR MX 41 float weight spec and part vendors needed

    Does anyone know the proper weight reject specification for the float in a Keihin FCR MX 41, which my 2007 FE550e came with? Or perhaps some kind soul has a new one and will weigh it and reply? I am used to defining float serviceability reject criteria by weight, as per...
  14. Taffy

    Vector templates/files needed 1989-1999

    anyone here had a company do the hard slog of making vector files for the 1989-1999 models. there will be either FC or FE files but I need to save some time and miey if anyone has a set for me, cash can be involved (you just supply the vaseline.... Taffy
  15. M

    Separate headlight switch needed?

    I just bought a 2010 FE570 that did not come with a headlight, so I purchased one. Plugged it into the headlight socket, started my bike and NO LIGHTS. Do I need to now buy a handlebar switch to get my new headlight to work? Or, is there a way to hotwire the harness so that the light stays...
  16. L

    Looking to buy - advice needed

    Hello internet. New guy here looking for help. I'm 45 and in good shape. Rode enduro (XR250Rs) in my youth and switched to street and have been riding VFRs ever since. Looking to get back into dirt since my 6 year old is about that age to teach to ride. I tripped over a 2000 FE400E I saw for...
  17. L

    Thinking of '00 FE400E - advice needed

    Hello internet. New guy here looking for help. I'm 45 and in good shape. Rode enduro (XR250Rs) in my youth and switched to street and have been riding VFRs ever since. Looking to get back into dirt since my 6 year old is about that age to teach to ride. I tripped over a 2000 FE400E I saw...
  18. H

    Kick start lever for 2005 450 Needed!

    as the title says, anyone have one?
  19. feukfeuk

    Keihin carb help needed!

    Okay so I have two "buttons" or "levers" on the carb, one red and one black, the one I bought the bike from told me the red one was choke and that he had seen the black one, that tells me he wasnt really experienced so he cant be trusted. ;) Well, I know that one is choke and the other one is...
  20. Tempest

    Engine rebuilt - set up issue- HELP needed!

    Hello Guys once again I have to ask you for help and advice regarding my Husaberg 501 '97. Engine is now after a nearly coplete rebuilt but it did not start at all. Seems to be an issue either with parts or set up. It kicks back while using kickstarter and does not start. The obvious...
Back
Top