mod

I have an 02 501 with the Dellorto. It has worked well for me to this point. The bike runs and starts fine. The only complaints I really have is the throttle seems to hang a little sometimes. I do not mean the throttle cable. The throttle snaps back quickly when you twist it, it just seems to...

i have a limited number of the Husaberg original exhaust end cap modifications in stock, get in now, i posted pictures a while ago ORANGEBERG

Hi, I'm in Italy and I'd like to install a GPR stabilizer, possibly the V2 release (sub mount for 1-1/8 fat-bar). Does anybody know, exactly, which model? I'm going to buy online but GPR website is not very clear on that since my bike came with the new stock upper triple clamps (it's CNC)...

there have been quiet a few people asking about exhausts so i took some pictures of mine.and will attach photoes. the front pipes and conectors are oe the old tail piece was cut off and a new link pipe welded on just after the joint by the heat guard the tail pipe then slips on and is held via a...

Should Be A Quick One To Answer,I Seem To Remember JoeUSA Mentioning Part Numbers Of The Blanking Plugs You Can Use To Block Up The Hole In The Frame. Anybody Know What Its Is Or What Bike Its From? Cheers In Advanced

hello :) i`m not very good in english but i have a problem with my berg, i have a 2004 husaberg fe650.the bike is orginal with orginal husaberg exhaust system and orginal jetting.but the spark plug is white and the bike is backfiering(pang pang when i let go of the trottle) is it...

Has anyone removed the backpressure " washers" that are welded inside the header pipe (its a 00 501e. ) any negatives ? im thinking of removing them and rejetting for more " flow" and hopefully a little more "snap" .. thanks for any replies in advance ...

Hi there, has anyone had much success in lowering the seat hight for those that are not too tall. I have modified the suspension to lower it 30mm on some bikes, but believe it seems to never really work that well. I notice in the forum the pictures of the frame modification to lower the seat...

Finally did a breather mod to my 05 Fe450. To connect the two vent outlets a 3/4" heater hose adapter was sourced from NAPA Auto Parts, P.N. 9935. To plumb from the valve cover spigots to the T adapter I had some old water cooling hose from a 1983 YZ250 which I cut up in order to have a...

Hello guys: Im looking into buying one of those problem bikes that has a lot of extras but is plagued of problems. And would like to know if anyone knows any possible causes. :shock: The guy explained that from brand new his son went to a 5 day long enduro race and the bike sized ...

When I bought My new 06 Fe450e a couple months ago, the bike was jetted by Dan at motoXotica, he had richened up the stock Husaberg jetting to 48pj 178mj needle one clip richer then stock FS 2 turns. Bike ran great 0-5000 feet in 50-75F. electric sewing machine fun 15-20 hours...

I was looking to see where I could fit a couple tire irons and a spare tube on my bike and I decided to take a look under the seat. As you know, the front part of the seat is indeed part of the air intake. The second part (behind the filter) is divided by a sturdy plastic divider which...

My bike had the breather modded so that it does not connect to the frame anymore, but is cut instead, connected with a wire to the hose coming down from the frame and a piece of foam inserted in it. What is it good for, what are the pros and cons? It's seems that it's a piece of foam I'll...

many years ago whilst road racing i moved to mikuni after 10 years of dell orto (they were out of date even then!) after i'd moved on i heard about a mod to the back of the slide cutaway? coronaberg told me that he had tried various carbs and had found the carb containing a slide with a small...

If so what improvements will I see? And what exactly do I have to do, to it to mod it? And is there instructions on how to do it etc. Has anyone in Australia performed this mod etc? Thanks guys