mod

Hey all! I'm kinda new to Husaberg but having some maintence on my bike now. Going to change the rocker arm bearings, but cant get the cap ends/shaft out of the cylinder head cover. So, how do I do it? Tried to search for a forum thread about it, but couldnt find anything.. :( Andreas

My new FE 390 arrived last week and I decided to do the pre-filter and Can-AM inline filter mods. So I did this mod over the past weekend and noticed that the original 10 micron filter was missing. I didnt find this in the engine parts manual either. So my question is if this bike comes with...

My freinds, It seems to be a easy/cheap trick to pick up a spare pony or two, at least on the newer bikes. my question, is it a waste of time (and a seat) on the older bikes with two air filters or is there still some benefit there? it seems like the side frame filter on the older bikes is...

I wanted a quiet powerful 4 stroke to sneak around on the beaches with ... when I picked up my berg, I was astounded how loud the airbox is and after putting on an aftermarket seat, it is even louder because the guts seat doesnt seal the airbox as well.. so I carefully put two strips of self...

Id like to see some photos of the air filter / frame modification that is done above the rear shock mount if any one has any? Thanks in advance :)

Hi I have a 2005 fs 650e and I am constantly loosing oil. if I look in the frame it has traces oil oil in the frame. I have blocked off one of the breather holes and connected the other to the frame with a sponge filter. how do I stop the oil from leaking into the frame. I'm wondering what...

I modded the stock end cap today. I enlarged the opening just a little. I have 2 650s , one with the Akrapovic an other stock exhaust. It feels like the Akra give me at least a few HP more and the stocker feels a little restrictive compared. So I wanted to give the stock exhaust a little more...

I have just recently had some work done on my 01 501 and one of the mods was to vent the crankcase through the exhust. Craig at HRT racing hs been doing this mod to all sorts of racing bikes for years so I had him do it to mine. All he did was weld a small tube on the header under the gastank...

Can someone tell me where to find the videos of this mod on this site as i saw it here last week but cant seem to find it .'Very good videos on the carby which limits the squirt when you snap the throttle no more bog.

hi all im a new member and am looking at buying a new 2011 fe 570 does any body know when the 2011 model is coming out in australia.

In this post viewtopic.php?f=5&t=12706&p=106683#p106680 a seat mod and the fact that he saw an increase in HP when removing the seat was mentioned. I asked but never got an answer. I searched and could not find an answer. What seat mod?? Thanks.

basic mod to improve the life of your fork seals - cut a bit of foam 10mm x 10mm x 160mm - soak the foam in wd40 - prize out the fork dust wiper seals - install the foam in the small cavity between the fork seal and the wiper seal - install the wiper seal (will be tighter fit now) -...

Right so it looks like I need a new starter sprague but I have been Reading about a mod for it, what does this involve or do I just need a new sprague? If so has anyone got the part number, price and where I can get them? Am I also right in thinking I just need to remove the clutch and then...

For the guys who have totally removed their throttle stop screws on the 09/10 FE models as per the de-restrict PDF file that is floating around. I just done this and by actually totally removing the screw allows the throttle body butterfly to turn past vertical and actually restrict the intake...

Have i missed something and is there some mod needs doing to the engine mounts on my new steed?

Hi guys, Been a long time reader of the site and have just joined up. Great site. What i need help with is jetting for my 04 450fe with exhaust end cap mod. I only ride the bike on trials 0-2500 feet. No other mods are done to the bike except for a 52 rear sprocket. I live on the East Coast...

Here's how I did it :D

can any one help me ive heard there is a mod you can do is it worth it its for a 07 FE450 thanks dave

Can anyone clarify this mod, the 04 fork internals run three bushings plus an aluminium tube. I have been told by some one but can't remember who, when rebuilding the forks they function better if the centre bush and tube is left out. If you look at the parts manual for the 05 forks there is...

Hello, Im new to the forum. Seems to be alot of Husaberg info round these parts :D I have an 04 FSE 650 and have just fitted full Ti akro system, Was interested to find any other members who have cut a hole in there seat above air filter as to let more air through?? any one have any pics...