mod

Hello, I picked up up a project 07 fe550, it started burning oil on the PO, he took it apart and there it sat. From what I can tell something scratched the cylinder, causing a lot of blow by or oil getting passed the rings. The weird thing is the valves look just fine, and so does the...

Hey guys, I've been looking at older threads for breather hose mods but I failed to find any pictures as these threads are quite older now. So bottom line, can someone provide some pictures/details on how to setup these mods? I'd like to see how you go about these. Also, did someone mod the air...

I was speaking with a new Berger friend about best bang for the buck mods to do on my 08 fe650 and he mentioned- "try the hole in the seat mod to help the engine breath better good for a couple of hp" Has anyone tried this mod, have pics, and jetting specs if it was needed? Thanks!

Hi! I am building a bike based on a half-destroyed FE501, just finished repairing the frame and suspension and put in the new engine (it is a 125 two stroke). Dont worry, the original engine was total toast, a valve broke off and made some party in the cylinder finding its final resting place...

Hi guys Didn't succeed finding a straight answer with todays knowledge and experience to my question so here it is: I have a dual vented top on my 2005 450FS. Someone past owner has blocked the rear vent tube as a mod and I have kept it that way. What do you guys think, should I keep it that...

Hi guys! So much time has passed since I've been here last that I thought I was not this forum's member... Sorry about that - been riding a lot although! ;) Extreme Enduro season here in Portugal it's on! Guys, it might sound like sacrilege, but I'm wondering if anyone has ever tried to...

Hey guys i recently bought a low mileage 08, There are a few mods i am wanting to do to it and was going to do all the electronic ones at the same time. so i have a few question. One how powerful is my stator? I was wanting to add a charge port or two… for phone and GPS will it handle this? If...

So I had my mod 2 today. Had real issues hearing the examiner over the radio. I kept shaking my head and tapping the helmet when he spoke as it was all distorted. He asked me to pull over 3 times before I could make out what he was actually asking me. I could tell he was annoyed with me like...

Hey All, Gave up on looking for a 2014 model after going on "how many left" and seeing that there are only 2nr registered 501's in the UK :eek: Picked up a 45 hour 2013 501 instead, what an awesome bike, powerful but silky smooth and controllable :cool: Parts I have ordered so far...

Hi Guys, I've tried finding the answer to this question on this forum, but not had any luck with this specifically; so hope someone can help me? I've just replaced the packing in my can and noticed the design of the AU cans is different from the US and EU cans? Even the later model FS...

Hi! I am trying to locate any information about WP 03 USD third bushing modification, but no luck so far. Any possible links about this will be most appreciated! Thanks!

Hi there, I cant seem to find any good dealers/shops that has design/styling parts for my Husaberg. I have to Paint the plastic my self, I cant find any cool brake calipers, gear lever, brakepedal, exhaust or similair :( Anyone who can help me out please? Ketil

I've been busy sorting the strainer issues now the factory have stopped making them for the 1989-2002s. the idea is that you can use a 2003-2008 strainer which is fatter but shorter with an alloy spacer at the pump end to downsize the fat strainer to fit into the existing oil pump entry hole...

hey all. can anyone give me more info on the kick sledge mod and what to do to fix it?

So the stock FE390 headlight is dull.. $70 will fix that. http://www.ebay.com/itm/151100173994?item=151100173994&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr 3" hole saw in reverse direction... centered on the little circle on the middle of the lens. Then filed out enough to fit...

Here is the problem. My '09 FE450 runs great for about a hour or maybe two. Then it starts to hesitate and sputter randomly. If the bike cools off, it runs great again, so it appears I have a heat soak problem. It is not the gasoline overheating since refilling the tank with fresh, cool gas does...

Hey all, don't know if its been done before but here it is- Its a controller knob from an electronics store super glued to the stock numbered dial on the stock mapswitch. It was a "meant to be" kinda fit, and the dials should be universally available. The rubber housing has been cut to allow...

Just bought a new TE300. My dealer is suggesting a mod to the carb including "factory jetting" and new throttle slide. Said that this is the same setup that the factory guys run. Supposed to increase low end chug and broaden power through out. Costs about $100. Anyone familiar with this, or...

as per another thread, i put a lexx exhaust on a few weeks back to avoid heating issues with the stock pipe. i did the five minute idle thing and the bike runs okay, but have noticed that occasionally i blip the throttle to jump a log or rut and the bike stalls. from reading around, i assume...

Hi. My 2005 fs 650e has been having problems starting with the e-start when the engine is cold. the stater just spins and when the engine is warm no problems starting. I removed and disasembled the torque limiter gear and I found 2 cup washers instead of one. should I remove one and install a...