fuel

does anyone know what the fuel pressure should be when checked going to and from the pressure regulator? want to make sure its at least pumping the right pressure before I pull the whole thing apart again. I saw a post on here where someone said they thought it was 60psi, wondering if anyone...

I know it has been covered here a million times over BUT I have a new fuel pump for my 2010 FX 450 and want to swap it out sometime soon. Is there a complete list of things i need to get to go along with the new fuel pump, Clamps tubing etc etc? I know there is a different barbed or nonbarbed...

Just a whoe for ebay UK and buying fuel pump. The pump itself works just fine but comes in a kit with a hose. The hose is not submersible! I got stranded in the woods and had to do the walk of shame. I gave the seller a fair chance to explain but it was all judder. Me: "Just want to let you...

Hope somebody can help. I had to solder the 4 red and white wires in the wiring harness under the fuel tank . All went well pump primed everything good ,started up no problem . I thought i would make sure it was a good soldering connection and soldered the wires well.In doing this i did not...

A couple years ago I bought a 2009 FE 570 from a friend. He said he never had any problems to speak of with it and for the first year I had it neither did I. But after some bad gas in Baja the bike started to have issues. I was on a ride in Foresthill when it got real bad. there was no response...

Hello I man looking for 2009 fe 450 fuel tank?

Hi guys, I own an FE570, 2009 model. I have mounted the 70degrees subframe tank recently. I used to use a Safari front tank before that. It looks like my fuel consumption is pretty high. I'm using the Berg for Rally Raids and trail rides. So, what is the mileage you get from a standard...

This on a FE570 the Fuel filter sock the one that go's into the tank fill hole only last Me about 4 months before it starts to clog. Is there a way to make them last longer at $30.00 a pop it's not cheep. Is there a way to clean it. Doesn't look dirty ? Thank You

Hello to all,, I have just recently purchased a 2006 FE 450.. I am not much of a person for riding in the wet weather, but having just acquired the beast that she is, I took her for a strapping.. I had arrived home, I let her cool down, etc etc.. I washed her with the garden...

Hello, I have some mix-matched fuel hoses on my rig... so I am going to buy all new hose (the PO zip-tied instead of hose clamped, so it's not pretty). The woman at the local auto supply said that 1/4" ID hose was what I would be after... it seems about right since I measured 7.34mm ID on the...

Mahle KL-97 Fuel Filters for sale. These are original Mahle filters as used by Husaberg and also Ducati, KTM and are often located inside the fuel tank or as an inline filter. They are the exact same filter you will buy from your dealer, minus the one off use Oetiker type hose clamps...

factory fuel cap anodized in blue with tank vent in excellent cond £30.00 also have front and rear husaberg axle sliders some scuffing but otherwise perfect cond £30.00 £ 50.00 shipped in uk £60.00 shipped outside uk Husaberg Fuel Cap Photos by baz691 | Photobucket Sliders Photos by...

I'm looking for a 70 deg Billet Fuel Pump Holder/Adapter. Anyone out there know where I can buy one? Thanks, Ron

So, a little back ground. Got the bike to put a Timbersled kit on. Great bike for that. Lots of power. Getting it ready for the season and decided to do the bearing upgrade to the Timbersled. Got that done and decided to wire up a tail light because the kit doesn't have a brake light(removed...

I've broken the connector for a fuel hose on the regulator and so it looks like I need to chase down a replacement. I've had a look on eBay and found a few - KTM SXF250 350 2011 12 NEW Fuel Tank Pressure Regulator 75007088012 KT4139 | eBay 2009 KTM Duke 690 LOW Mile 1K LC4 Fuel Pressure...

I have three assemblies that came with the bike I purchased. I will verify that they are good if anyone is interested. Make me a descent offer plus shipping. Tom:eek: I am in New Jersey USA

I have a new 2.8L auxiliary under the seat fuel tank, made by Acerbis for 2006-2008 Husabergs, wonder if there was any interest in it. :confused:

Hi All, I have a 2012 TE 250 that's always been a gem. Runs strong no matter where I run it, desert, mountains, sea level, 5k feet, no matter, starts and runs like a monster. Went for the first ride of the season (california season doesn't start until rain) on Saturday and the bike didn't...

I am looking for the black plastic housing that holds the fuel pump at the bottom of the tank. Part underneath tank with 4 self tappers that fastens into the plastic tank. Mine was modified by the first owner, pump is now held in with zip ties. I want to replace back to standard. Should be...

So as to not be different than everyone else, the fuel pump went on my 2010 FE390. As per the recommendations on this forum I have ordered a CA Cycleworks replacement. Before I start taking it apart this weekend I have a few questions: 1. Are there any other parts I should replace when I...