fuel

I'm original owner 2011 FE570S, 3300 mi, 178 hours on original pump. Bike was built with the "corrected" injection pump. Came back from successful Colorado trip, changed oil, etc., washed bike, started it till warm and put it away. Getting ready to go back to Colorado, pushed the button...

It can be new or used for a 09+ 70 degree degree bike.

On my previous rides, I noticed that when I laid the bike down, it would leak fuel. I didn't have time to investigate where from exactly, but naturally was suspect of the vent hose. Today, I took the tank off the bike to mount the cooling under-tank blanket. With the tank off the bike and...

Hey! I've got a problem with my Husaberg FS 570 2010. I had been out and run for an hour, suddenly dies. Drove up to the edge and tried to start it. Nothing happened! When I start looking, I heard that the fuel pump went and the smell of gasoline. I pull out the plug to the main relay. Then I...

After taking my fuel tank off to clean it out and replace the lines, I have realized that hooking it up is more complicated than I thought. The tank had been disconnected before I bought it. I think I have an idea of how it should be hooked up, but without any prior experience working on bikes...

Riding my 2011 FE570 going off a small jump engine had a small pop and died. Lucky for me it was at the top of the mountain costed the bike for about 3 miles push it for only about 500 yards before I met up with friends. Later tried starting it nothing but could hear pump working (sounded a...

I have a Fe450 from 2009. It's leaking when the engine is started the first time. It leaks for about a minute, than it stops. After it stops leaking there's no problem. I can ride the bike without any problems. It does that every time when i take the bike out for a ride. It's leaking at the...

Hello all, I bought a used FE570 and I found a bit on the bike that looks a bit strange to me. Just beneath the tank is a fuel filter covered in aluminium foil to reflect heat. The place for this filter is just weird (above cylinder), seems to me that this would not be ideal for the fuel, to...

hi i'm a new registered and a french guy. here's my problem i have a 2010 390 fe with about 105 hours and approximatively 2500km. last day i take a ride and heard some backfire when it was even cold. the bike was running badly like some "air holes?" i thought it was the gas level but no after...

I just replaced the fuel taps on the 05 with a Clarke tank. One original tap was leaking and the other I had replaced when I purchased the tank with a Husky tap off of a 610. I think most who have this tank have installed the Husky tap on the left side as it points the fuel line in a better...

Quick one, can't seem to find details anywhere. What's the size of the fuel hose between pump and fuel rail on the 09 fe450

So a while back my injector blocked and after stripping down and cleaning with carb cleaner and a 9v battery etc I thought I'd best look at a solution. The fuel rail didn't have the tiny filter insert and having read online it caused more problems than it fixed I decided against it and just put...

Hi, new to the forum. I have found many threads on the force 70 tanks and mention of the mod of the 570's subframe, but no instructions on how.Can anyone point me to the correct way to do this mod please? I'm in the process of buying a 570 or a 2013 501 but fuel capacity upgrade is the deciding...

Dear all, i am (desperately) looking for a fuel tank (ideally 2010) for a fs or fe 570, to be shipped to belgium, thanks, Nico

Hi just wondering if anyone is interested in selling there original fuel tank. Cheers

Did all the fuel pump mods on my 2010FE 570 and went out on my first ride this past weekend. Worked Great. Stopped to take a rest in the middle of a long ride and decided to check my fuel. Opened the cap and fuel game gushing/FLYING out like a geyser. Very dangerous situation with a hot bike...

I am a new owner of 2011 fe570s,purchased 2 months ago with 40hrs on clock.Went to ride last week and while letting it warm up she began to lose idle and shut down. So I checked for spark and theres plenty with new plug.IT will start and run lean for a few second when I spray starter fluid in...

Guys, please help me out here :) I changed fuel pump this summer, however I can not make the hose stay on the pump flange for any length of time :/ I used a submersible normal type of hose that I know is submersible along with a standard hose clamp, hose is definately submersible as I use the...

What is the easiest way of doing this? my bike doesn't run a rad fan if that makes things any easier?

so I took my 1990 fe 501 into a shop and the guy took off all the hoses for the carb and never put them back on... no I need to figure out where they all go. I know which port is the main intake for the fuel so that gets on hose out of the way now I need to know where the other hose that runs...