fs650

Hello all, i want to start off by saying that i feel little lucky becoming Husaberg comunity member at all. I decided to buy a Berg by looking at : - Price - Usage - Design - power - Capability - Part avalibility I find theese bikes verry nice along with KTM . About myselv, i am a 22 year...

Is it possible to change the jet needle clip position without removing the carb? Looks pretty close to the frame... Thanks!

hi all im daryl im looking in to buying a fs650 supermoto for the road and was just looking for any info really ive seen a couple about but ive heard you have got to be carefull on what year you buy im curently looking at a 2004 model reliable?? thanks in advance.

ORIGINALE CDI FOR HUSABERG FS650 WITH CROSS MAP THIS is a original Husaberg CDI with a different MAPPING if compared to original CDI bundled with Husaberg FS650, this has different Advance CURVE more powerfull at low and full throttle. This CDI is compatible with model from 2005-2008. Part...

Hi guys, Last sunday I've made a " trackday " of a portuguese Supermoto Forum in Abrantes ( kart track ) with my Husaberg FS 650e 2006 SM model. The bike only has DOMA 96db silencer and it was rejeted. I've made a mix of all the sessions in one video, then the other video is with the camera...

http://www.supermotojunkie.com/showthread.php?110814-2002-husaberg-fs-650-winter-rebuild what do you guys think so far

Hi! Doesn anyone know how the coolant temp sensor "works"? Temperature / Resistance (curve) ? :) Thanks! Regards

Im new to the forum. I live in Indianapolis and im currently looking for my first Husaberg. I'm trying to get my hands on an 07 or 08 FS650. I've checked ebay, thumpertalk (another forum) auto-rv.com and my local dealer and have come up with nothing. Also, i tried to check the classifieds...

Hi Guys, I'm new to the forum-never knew it was online, so glad to find other 'berg sm fans! I'm in Oregon, so don't see too many here. I raced an '04 FS450 for a couple years, then sold it for some reason that made sense at the time (*******). I've seen the light again and stumbled on to an...

hello all, newbie to the site :D recently bought a 2003 fs650e as a non runner due to bad stator, stator was replaced with a rewound unit and the bike fired right up and ran great for around 3 hours use. The next morning i got the bike out, fired her up and went on my way, after around 10mins...

I have the following problem with the ignition of my bike: Engine cold: runs normally, but I hear a few times the loss of ignition, only one spark each time. When I start to drive with a warm engine the problems seem pop up more frequently. After 10 minutes the problem is so worse that the...

Hi can somebody tell me the easiest way to pull apart the muffler, i have drilled the rivets out both ends but cant get the thing to budge.. the can is a RHINO Racing one.. Thanks!

I have a problem that happens sometimes .. I have a husaberg fs650 04' motard and when I go for a ride sometimes it turn off,like i have close the gastank!!!like i turn the key off....like turn off the switch.i open the throttle but nothing happens...then when i stop the bike with kickstarter 5...

I want to know from where and what model of axle sliders can feet on my bike... i want for both wheels fron and rear..i prefer red!!!can i install from ktm??? thanks...

Hi I have a 04 Husaberg fs650 but want some enduro wheels, can anyone tell me if any KTM wheels will fit as that’s what I can find the most of on eBay. Thanks! :D

Can any of you guys tell me exactly what it is? Make, model, and # of links? The bike I just bought has an RK520EXW and it's too wide; it touches the clutch slave cover. The previous owner installed it and never rode it. BTW-Anyone want to buy a new chain? :) Thanks!

I need a black tank, new or used... I can only find yellow. Anyone? Thanks, Donald

will a 10x18x6 (oem 10x18x4) sealing fit in the clutchcover or is it to thick?

Hi, i just got my self a 2004 HUSABERG FS650, only had the thing for 20 minutes and the bike just stopped when i was traveling along at 70mph, i rolled to a stop and couldn't get the thing to fire, after trying everything i could think still no pops.. so i rolled it down a big hill trying to...

Hi, tonight i started to take apart my fs650 engine to do some service on it. My problem is i can´t find any plug or hole where i´m suppose to place the engine locking bolt as described in the repairmanual for the 05 engine (downloaded from .se). Is there a new way to lock the engine on 06...