fs650

I've been looking at a FS650 07. I got no idea about the "service intervals" on the bike, and the owner have driven around 130 hours without changeing the (piston?) and it also has to change the "timing chain" Is this expensive to do, or hard to do by myself? Where do i buy it? And how...

Hi Crew, Recently bought my first Husaberg. I have to admit I was drawn to the FS650 purely as the "King of 'Tards", before I knew much about Husaberg and it's awesome history and values. This site has been a real education, so thanks to all that post here for the wealth of info. Being...

Hi has any on got a link to were I can get a rebuild manual for a 2002 husaberg FS 650 ? Cheers

Hello! My bike is afaik "a real supermoto", not a converted one. It's an 2004 FS650E. My local Husaberg dealer wants to sell me partnr 80009060000 for somewhere near $575. Are there cheaper versions of this rotor? Are there any downsides to using cheaper rotors? I've looked on ebay, but I'm...

Hi,i finally have mastered the kickstart technique on starting and got it running today,i realise now that you should never buy a bike as a non runner? It smokes,, alot,, and it is very oily from the front exhaust manifold?..thought by giving it an oil change may of cleared it as it has been sat...

Hey guys im new to this site, and i have searched for valve adjustment and found a good post but it didnt work for me:P I know i have to get the piston at top before i can adjust them, i put the bike in 6th gear and turned the wheel to the piston was at top and the norwegian husaberg dealer...

Do I need a clutch holder tool to remove the stock clutch basket? Installing a slipper. Anyone know the size of the nut? Says 18mm in the parts manual but I think that is the inside diameter. Thx!

I finally broke down and sprang for a STM slipper. It should arrive any day now. Does anyone have instalation tips? I found there are different springs that can be installed also. Thanks!

Hi Wondering if anyone may have any ideas on tracking down any of those " BIG BORE " pistons kits for 2004/2005 FS/FE650 Engine, and liners ,that JBS racing use to have available . ( or other possible supplier such as Arias or Mahle or JE ? ).........and aftermarket rods such as Carrillo ? (...

hi ive just got a 05 650 and after a lot of kicking it now runs it starts 2nd or 3rd kick every time but it will only run for about 30 seconds . as soon as it has cut out you can kick it off straight away any ideas?

Hello! I just hosed down my bike up at a car-wash, and now the speedometer is funky. It turned on, which I believe means that the "thingy" down by the wheel is working properly? I noticed it first when speed jumped between 0, and 50, and it just got worse. Now it wont even show speed. The bike...

Hi.. I haven't ridden my FS650 for almost 7 months.. So now I've got ready for a new season .. but.. When the engine is running, a lot of air seems to come into the engine oil? Is it normal (and I've just never noticed it before..) or?? With all new oil in the engine it gets almost white when...

hello, just bought a 2003 fs650, and have read that the 2003 is one of the worst models to have engine wise, is there any truth in this???? thanks

G'day, Has anyone run a Fs 570 against a Fs650?......cause my 650 rocks and I'm interested in the 570's? Cheers Cam

Hi, I need to replace the front brake switch on my berg and think that I would prefer to go down the path of the banjo bolt style switch instead of the fiddly little electrical switch under the lever (gets caked in mud and ceases all the time). Is there any reason not to make this change...

Been searching for some new wheel bearings for my SM but I can only find them listed for 04 and after. Anyone have part numbers or dimensions for the front and rear seals/bearing sets? I'm not sure if 04 is the same.

I just bought my first Husaberg, a fs650 from 2003. Any recommendations where to buy good spareparts?

Hi guys, Today I went to the dyno with my Husaberg FS650e SM, at the moment the engine has 11 850 kilometers. The only modifications are a DOMA slip&on silencer ( stock headers ) and a 180 mainjet . 60 rwhp @ 7500rpm and 61 Nm @ 5700rpm...

Hi I'm new in this forum, was reading it for a long time. I both a used FS650 a few days ago, with one problem: she don't start. I thought it might be a little problem, stator or ignition coil. Today I tested the Stator: 3k ohm on red & black / 170ohm on green & black When Kicking: ~30 Volt...

Ok I have taken apart my kickstart mechanism to apply some upgrades, transmission cover off, clutch of. therefore no connection between primary drive gear and the balancer drive gear. Removed the valve cover in order to inspect the auto decomp ande valve springs etc. Turned the engine and...