frame

Hi, in Germany (Europe) we have a spezification for colours, called "RAL" for example: http://www.tacamo.de/pages/viewarticle- ... 626-1.html RAL 5010 Enzianblau My 1998 FE needs a new powder coating, the company works only with RAL colours. Is this the right one? Has anybody...

hi all wishing to update my 97 400 is this possible what can you change tank? rad shrouds? would i be looking for a frame change due to the airbox anyone got any ideas thanks seb

Did any of these bikes come with a black frame? Did a search but was unsuccessful. Thanks.

On the 2009 570 FE I've torn or pulled out the right side course thread bolt twice, which holds the lower tip of the combo fender, side molding onto the sub frame, very close to where the muffler meets the pipe. The problem I have is that the hole is now stripped & won't hold a stock...

I was going to un bolt the frame that the seat attaches to on my FE570, one of the 4 bolts which threads into the plastic inserts won't break free so the insert is spinning in its plastic seat or enclosure?

Can get a good engine of a '02 550, but don't know if I can fit it in my '94 frame... Thanks in advance, Jerre

I know I have seen an Italian web page, selling a very trick framekit for the Husaberg.. Can someone help me to find this site? Thanks!

hi just wondering if there is any frame difference between 550 and 650.i bought a full fp exhaust which came off a 05 650.my bike is a 03 550 and the middle section doesnt fit around the down tube of the frame.the bike spat me off last year resulting in the rear subframe snapping [ as well as...

Hi there, I have shipped my 97 Berg to Austria, and getting a title is a major hassle. So my 'creative' idea is to buy a 94 FE501 frame with title, and just change the numbers. If this should not work, I would need to swap the engine. The reason why I would like to get a title and a license...

Hi I have a 04 FE550 with a round 170 hours on it and have noticed a crack in the frame near the rear brake lever , it's just under the footpeg i have 2 photo's. I can easily fix as I'm a boilermaker by trade but i though others may of had the same problem

Hi Guys, I have been offered an 08 FE550 but the frame numbers seem odd, they are nowhere like my 06 FE550. (They seem uneven and possibly hand punched) Can someone tell me what the numbers for an 08 FE550 should read like? The price is right and it has only done 20 hours, but it just doesnt...

During a ride my FE450E started stalling and became hard to start. Once cooled own started fine until warm and then stalled again. After pulling the air filter, I noticed steam in the intake coming up from the engine vent. Checked radiator, very low. Is this a bad head gasket or some...

Hello All, I am no mechanic but I am trying too learn!! A few months back I noticed my front steering stiffen up periodically. I attributed it to my setup( 17" Michelin pilot rear and 17" trials tire front) I know this seems like a strange setup but it worked perfect for my...

Dear members of the forum. We can after some time present a nearly ready new Husaberg 700cc Supermoto prototype. Should be ready for first test run with in a week, just waiting for saddle and smaller items. Frame: Deltabox. Engine: Husaberg 670cc 2005 model. Suspension: Ohlins...

if you sell a frame in the uk that is anything but brand stinking new, it means that the bike must must have a "Q" plate. a shyte end i think you'll agree. so when you think of breaking a bike just remember that your frame is worth zilxh! regards Taffy

Does anybody know where to get that little frame protector that goes over the frame and under the chain.

Just wanted to share this link. Browse it while its there. http://www.blocket.se/vi/11616417.htm?ca=11_s

Can any body tell me if the down tube on the frame shoud be straight, on the FE550 (04) that I have bought the down tube apears to be slightly bent in an out would direction in turn the back of the front mudguard is rubbing on the down tube. Allso the collector exhuast box is rubbing on the top...

Does anyone know where I can get a can of spray paint to touchup the frame of a 1998 FE400e. I need to repaint my kickstand after I had it welded. Thanks

My search for the biggest single has come to an end...almost! There is some disappointment insofar as the Big Berger has only a marginal crank. What I had hoped to do was adapt the engine to a Velocette 500 frame but, alas, without a flywheel comparable to its displacement it would likely...