frame

Hi guys! I'm a proud owner of a Husaberg FS570, i only have one issue. When driving my shoes and pants get in contact with the exhaust, aaaand its kinda hot.. Ill attach a picture with what I need. I suspect that the previous owner removed this.. Where can i get this, the carbon protector...

Hi, I have been absent of this board for a long time, because I have moved from California to Austria a while ago and not been able to do a lot with my 97 FE501e. To get an imported bike street legal here in Austria, it takes a lot of bureaucracy and money. A possible shortcut is to transplant...

As the title suggests I would like to see some pics if anyone has the blue chrome graphics kit on the yellow frame FE. I have searched for it and cant locate any 2012 pics with the blue chrome graphics kit fitted. Thanks Cam.

Went down at slow speed the other week but a direct slam for the LH peg because the bike tucked under really quick on rock slab; iced over. Thought peg was bent at first but fear it's the frame. Clearance between the frame boss that the kickstart stop screws into and bottom chain guide was about...

Here is a picture. http://imageshack.us/photo/my-images/818/imag0111v.jpg/ Full of dirt inside, if i remove the carb tube and the tube that goes down to the engine Can i just flush it with water? Or Will i get water somewere else where i dont want it then. Bought the bike yesterday, only had...

Id like to see some photos of the air filter / frame modification that is done above the rear shock mount if any one has any? Thanks in advance :)

Not my bike but found this when I was cruising the Expedition Portal for Defender 110 truck ****: He has a nice oil tank setup- http://www.expeditionportal.com/vehicul ... -bike.html

well today I removed my air filter to clean it and found that on the inside of the frame there is some sand and oil. the oil would be fromt the breather tube ( which I am going to reroute) but how would the sand get it. I put water proof grease on the bottom of the airfilter surface where it...

hello, can i use a frame from a Fe400 01mod and fit ALL parts from a FC450 07mod? does this engine make electricety so i can charge the battery? im getting it for a nice price and supermotard wheels and my fe400 is registered on white plates if anyone is woundering why im using older frame...

I want to weld a sidestand bracket onto my 2002 FC550. Any cautions or recommendations when it comes to welding on the frame?

To members in Australia Whilst 99.9% of my posts are for Husaberg i would hope that you would agree to let me slip a KTM topic on the forum, im going to do some MX racing in the vets classes this year and i desperately need a KTM 450 SXF 07 or 08 onwards to slip my new SXF 505 engine into, i...

I had nothing to do over the weekend so thought i would have a go at fitting an FX 450 motor into an old 525 exc frame, Well it wont go, which is bit of a bummer now have loads of ktm parts to get rid of. Anyone think the 70 degree motor would fit into an old style Husaberg frame without too...

Before I buy some frame guards I'd like to touch up the paint on my 2010 FX 450 frame. Anyone know what the color is called or where I can buy some at? Thanks!

Hey guys, Husaberg n00b here (not a bike n00b). I'm after a bit of info on FEs and the engines, hopefully you lot can help. I'm planning to put a rotax 654 engine (bored out to at least 720) into an FE frame. I know it would fit into an FE650 frame. They're fairly hard to find over here for...

some of the ideas in here viewtopic.php?f=8&t=13017 need to be tested the pics still truncate, you can open the links below to see more frame design looks easy in photoshop adjustable mythbusters "Adams rig" style to check geometry another jig to hold the head still and locate shock...

posted a similar thread previously so apologises for all the new threads. however how much work does it take? has it been done? thanks

Recently installed the plastic Husaberg Frame Guards on a 2010 390. Are they supposed to 'flex' behind the right footpeg and come into contact with the pipe ? If so, won't the plastic guard melt (melted my Tech 10's already). Does anyone have install instructions or advice on this. They...

can someone please tell me how wide the new berg frame is at the point where the top shock mount blends into the perimeter rails ?

How hard do you think it would be? Would the frame handle the added weight?. Just a thought. Peyton

Ladies and Gentlemen, I am happy to announce that some partners and I are currently in the process of pre production testing of a complete subframe fuel tank that will hold apporximately 1 gallon of fuel. This tank will be a complete unit, that is made to be a gas tank and will be a...