fork

Hi. I need your help. I have Husaberg FE550e 2008. I want to ask how much oil I have to pour in to fork WP USD 4860 MA in ml. My weight 72kg. I can't find manual anywhere. Please send me manual if you have.

anyone know off hand if the (2010) FE450 fork springs are interchangeable with the FX450 forks springs? thanks

So I'm a suspension noob, and while trying to change my fork springs, the shock rod sank into the tube and I didn't have anything long enough to grab it. I finally decided I could just remove the front tire and compress the fork all the way and grab the shock rod. This worked great, until it...

I have been trying to get the front end on my 08 550FE sorted and after doing research have concluded the factory spec sheet is incorrect. it calls for spring length of 485MM which is the correct length is 505mm and the spec sheet says tube length is 549mm which it is actually 577mm. My bike...

Hey everyone I am looking to re-spring my 97 fe501e. Iam 6'.5" 275 so I def need to stiffen it up. I have had some trouble finding heavy fork springs. Slavens lists some for the 98 up wp 50mm extreme forks. http://slavensracing.com/shop/fork-spri ... erg-wpx50/ Will these work in my 97 wp50mm...

Hey, I'm about to replace seals and oil in my 2011 FE390 front forks for the first time, and I have some questions to the forum- 1. Recommended guide or video? 2. What fork cap tool do I need? A standart KTM will do? 3. Recommended seals? thanks!

Hi Guys, Been a while.... hope all the Berg brothers are doing well ! Wondering if anyone can tell me who the Australian Berg importer is... i know they are in Western Australia. Embarrasingly, I have just had my forks fully serviced after so many years (leading up to 2014 SA Reliability...

Anyone know this for the US version? The shock spring size is easy to see, but what is the size of the stock fork springs? 3.8, 4.0, 4.2, 4.4, 4.6, or 4.8? Anyone by chance able to decipher corresponding rider weights?

Hi, Early this year I purchased a new 2013 Husaberg TE300. The bike is great, but I have one big problem.. The front forks in my bike was starting to act poor, and it was discovered by the dealer that something broke inside. I was promised all new internals in the forks. This happened in early...

I'm getting ready to replace the fork seals on my 2011 FE570S. I've replaced literally hundreds of fork seals in my lifetime, but never the Husaberg seals, so are there any little interesting tricks that I need to know or issues I should be prepared for?

Bought my bike without these installed but the ex-owner obviously gave them too me. http://i.imgur.com/EPVdCmK.jpg http://i.imgur.com/2YI4Yy9.jpg How do I go about installing them? Looks like I need to take off my front wheel, not sure I'd be confident doing that unless its piss easy. Thanks...

The manual states 635 ml or 21.47 oz per fork. Changing/draining only the fork fluid I get 17.4 oz out of one fork (the leaky one) and 17.9 oz out of the other. Not sure how much should go back in. Where is the rest? Has anyone else with this model measured their drained fork oil? TIA, BRod

Hello, I am new to the Husaberg world but love it so far. I recently purchased a 2000 FC501 with about 10 hours on it. I took it out for its first ride and now the fork seals are leaking. I received the suspension booklet for the rear shock with the bike but not the front suspension. I need to...

Hi New to Husabergs as I have just aquired a 1999 FE400E with a few issues, previous owner stated it need finishing off. Just replaced fork oil seals but am a little puzzled by how much oil to add, always done it on volume on previous bikes. Can anybody help please? Thanks Paul

just been for a ride and noticed a wee leek of fork oil coming out of top of fork its coming from around the rebound damping adjuster its a new bike fe350 only done 5 hrs any one hav any ideas would be great to hear,thanks!

It seems fork oil standards are not well regulated and the viscosities vary massively from brand to brand :roll: A problem if for example you want to stiffen or soften your suspension by chainging the oil weight. Steve Interesting oil viscosity comparison here. 8O...

Previous owner hasn't put on the fork guards or had taken them off. Do I need to remove the suspension to put them on or just the wheel?

Anyone have complete step-by-step instructions on how to change the fork oil on a -09 FE450? WP 48mm open cartridge. Thanks. JT.

I've picked up an 05' FE650 and want to swap springs front and rear with the motard. FS is stock and I was going to use the 88-250 and the 4,8 fork springs in the FE. I was going to respring the FS for my weight anyway, and if the fork springs are the same length it should be real close to...

equipping a 2012 FE570 as an adventure bike but also for gnarly dirt rides. haven't touched a thing on the bike as it handles in dirt so well, but it pretty twitchy at highway speeds. the forks sit above the top of the triple clamps by about 5mm, i'm going to drop them to so they sit flush, in...