fe650

Hi all, So this 2002 FE650 had been sitting in a corner for the last 6-7 years because of a small crack in the head where the cam chain guide sits. According to the owner that was the whole reason it was left sitting. I got the bike over to my place and went through the usual just to see if...

Hi Guys, I have just bought my first Husaberg and its a 2002 FE650 but it is kick start only. I have a base knowledge about Husabergs and lightly know my way around a bike. It is kick start only and has no Battery, ECU, starter motor etc but I believe it has a rectifier. I'm just...

Hey Guys, I got this 06 FE650 in the garage right now, one of the intake valve spring broke. I'm replacing them with Dual Springs and of course, we have the choice between Taffy and KibbleWhite. I can't wait 2 weeks for the Taffy ones to come from the UK so I'd like to go with the KB...

was running fine until the cam chain broke. replaced cam chain, sprocket, tensioner and blade. all reassembled, now no spark. I did the orange wire disconnect test, stator tested spot on (red to black=3043, green to black=165) disconnected all but red, black and green. any ideas?? am i missing...

so, i took part the engine without checking for timing marks on the crank gear and the balancer shaft gear. i've tried a couple of combinations with no success. crank at TDC, balancer at BDC, cam sprocket marks horizontal. 3/4 of a rev and the piston touches the valves.

Hi all, I've had an '04 FE650 for a while now and have been slowly restoring it but just the other day I drained the oil for the first time since I bought it from the previous owner and found glitter sized metal shavings, I'm thinking this is not healthy but then again I don't know how much...

Hey All! I want to run through a brief history of an FE650 I need to move to someone else to find out what the UHE populace thinks I should do as a next step. I have an '04 FE650 that was purchased from the Corner Grass guys here in Alberta, Canada after they won the Endurance Ice Racing...

Looking into buying a 07 fe650, are there any common problems I should look for?

Hello All Looking to buy either a FE650 2004 onwards the later the better...or possibly a fe570...decisions decisions...already run a FE650 but 2002 ... Many thanks for your time

Purchased back in 08/09 from a fellow in AZ. Rode in VA and PA. Strong and runs well. No issues. Street Legal with current PA registration Dicks Racing Suspension Taffy's Jet kit Ti exhaust Cooling Fan $3500 OBO. Located in Central PA

i just got a 2001 FE650, it has a broken timing chain and a bad tensioner i think. i need a source for the chain and tensioner. where can i find an ( 06B ?? ) chain of good quality. 70 links?? i may need a new lower sprocket as well. thanks for the help!!!!

Hey guys, glad I found this place. I live in a quiet suburban city in Utah called Springville. I’m a Designer/Engineer for Vanderhall Motorworks (vanderhallusa.com) for my day job, and in the evenings I like to tinker. I’m pretty inexperienced when it comes to Husaberg. I picked up a 2006 FE650...

I have following issue, recently bought Fe650 2004, but seems to have 2001 fe400 engine: code on cases is 4011172 Is it possible to build 2005+ fe650 engine basing partially on its parts? What big parts will be needed for sure? Whole inginition setup, 80mm crank, piston, what else? I would...

Greeting from finland! I thought i could share some pics of my Husa on action! Its so great bike for all terrains, and its really fun to ride was then summer or winter! Powerful dirt mover! Beast on ice! And of course, on asphalt! Edit:Oh snap! I just...

Hi The rear shock on my Berg is way too firm, I'm 80kg. Going to play with the rebound and comp but would like to know how many clicks should it be in stock form and work from there. Riding is more dual sport type terrain so not too hectic.

Hello all. Very happy owner of a 2008 FE650 here. Firstly I'm sure most of these questions have been asked before but if you dont mind I'd like to post them here. The inevitable oil breather. Is it normal for some oil to be in the airbox ? I have the stock Y piece later design breather but...

Hey guys, Sent my head off to Thumper Racing for a port job. While I am in the head/rocker cover I want to replace the rocker arm bearings, maybe cam bearings and use a Regina timing chain (Regina was recommended by JBS) Anyone have the rocker arm bearing size and the Regina timing...

Last weekend I was at Horse Falls and Winchester Bay sand dunes on the Oregon coast for a test of the 08 fe650 Husaberg's MSV Racing lightened flywheel. Here is vid of the Berg at Winchester Bay, me discovering "Banshee hill" and climbing it once, plus a nice 80+mph 6th gear run. Love the...

Hi everyone. I've recently purchased my first berg. A 2003 FE650, I'm using it on road with 17's and bigger caliper. I'm looking to upgrade the exhaust, currently standard(I think!). It seems almost impossible to find one specific to my bike! Does anyone know of any that fit or know...

A friend of mine who helped me locate a complete fc650 stator, flywheel and 2 covers told me- "if you file out the pole pic up points slightly enabling you to advance the ignition slightly it makes a world of difference to starting and performance" Anyone else have knowledge or adjustment...