fe650

Hey ! So i got my autodecomp for my 02 by mail today :) My question is how hard is it to install it and can it be done without taking out the engine ? Ive worked on engines before so not a total noob but dont want to start tearing it apart and do something stupid. and iam guessing the...

i have done the convertion from manual decomp on my 2001 fe650 to 2004 autodecomp, , and it works fine, but do i adjust the valves different, it seems to suck air true the exhaust now, and spits true the carb

Hi, Does anybody know how many chain links a chain must have for a Husaberg Fe650 2002? I need to order a new chain. Mine is missing a few links i think. (bought the bike as a project) Kind regards

is it possible too use a keihin 3900a-drl on a husaberg fe650

i have a 2001 fe650 whit 40mm delorto it floods all the time, i took it apart and cleand it, adjusted the float hight and it was fine, but it was wery rich running, so i adjusted the needle 1click down, now its flooding again, and i dont open it, just loosened it up, and twisted it aside...

Hello Took the engine out of my FE650 for the first time (for me) and having a poke around. The link below is a video of the the auto decomp, should the spring be firmer than this? Also checked the cam chain tensioner and it was fully extended to the end "click". So a new cam chain I guess...

Hello gents Hang on, there is some very technical jargong to follow! I'm trying to get my bike to charge my battery basically, and can't figure out how the cable from the stator should connect to the regulator/rectifier... I've looked at the wiring diagrams, but I think a previous owner has...

Everything else runs mint. Shifts smooth rides perfect. But when i downshift and let the clutch out theres a chain scraping sound in the engine towards the front of the bike. I was kinda thinking its the timing chain but before i took it apart i just kinda wanna see if anyone know what im...

Hi all, I have a 2004 FE650 (without kick-starter from factory), just wondering if anyone has a full assembly they'd like to sell or know somewhere that might sell at least some of the parts. Thanks

Looking at getting my -02 FE650 registered after finally getting everything (almost everything) running. I’ve been looking for the specifications for the brake rotors for my bike, and it’s hard to find! My rotors are 4mm thick where there is no wear (so 4mm brand new?), and 3.3mm thick where the...

Hi all! Got a Husaberg Fe650 that I purchased 2nd hand. It's got a home made electrical component, no idea what it is! I've attached a couple of pictures of it (hopefully they're showing up?). Got three cables coming from it, one of them is connected to power from the stator. I unplugged the...

Would anybody be interested in this system at all? Bought it with the intentions of installing it on my 2003 FE650 and have decided to either try and do a deal on a Beringer 6 pot to sell it and put the money towards other things needed on the bike Videos of the exhaust can be sent upon...

Surplus parts from a FE650 as it's been built into a custom flat tracker (will post later). Pictures attached in pdf so that they're higher quality. 1. Frame with assorted rubbers and battery box. Some surface rust where the paint has scrapped off for instance on the bottom frame rails...

Hi Looking for spare Part manuals for my FE-650 07. Owners manual And flyers for this model are in big intrest. Live in Sweden but international sellers are welcome:) Only original no reproduction, mint condition or better MR 1000

Hello, (I just got here and its my first post, so be gentle please) I can't get my berg starting. The last time I drove it, it was almost four years ago. I already changed my spark plug, spark plug boot (I cut a piece off the ignition cable), and checked the spark. It isn't the biggest and...

Hi everyone So my 2002 FE650's brake light isn't working. It seems as though its getting no power. I replaced the original brake light for a LED on as the old light didn't work and I assumed it was because of the state it was in. However, it seems as though that wasn't the case...

Hi all, Thanks for the add. New to Husaberg and apologies for another " no spark" post. Been for two rides on this rocket before it suddenly died. Track was a little damp and muddy but not that bad I've checked the stator and have on Kickstarter Green to black 190 ohms and 1.9 vac. Red to...

FE650 engine swap into older husaburg 97 501 possible? Got a Ca plated 501 that is tired & I am tired of kicking it. This would be a nice solution vs rebuild and live with kick starting. The extra 30% power...Bonus! Wondering if it drop in easy mod or don't attempt Anybody know...

Hello guys, i have been riding my husaberg 650 for about 20hours. total of 426hours on speedometer. the other day the engine kind of died off while i was driving in about 60km/h. when i pulled in the clutch the engine stopped completely and when i let go the backwheel was locked (didn't turn) in...

Hi guys, I have followed everyone's advice on here so far and have managed to make my 2002 FE650 start on the second / third kick. It is kick start only and I but has the Sprague bearing and everything in the crank case (assumably a previous electric start then stripped). I have found...