fe600

Selling everything as a package. Two new sets of decals(one H-line and the other is a Blackbird kit, which is new in the package), new in package UFO radiator shrouds and rear fender, several extra plastics and spares. New chain, sprockets, grips, oil filter and husaberg backpack. This is a...

i have this 96 fe600 and have tried all i can to stop an oil leak from the o-ring around the starter motor. oil pores out when i rev the bike. i have replace the oring tried 3bond, silicon gasket etc and it still leaks. i love this bike and it runs great except for the fact i have to top it up...

Howdy all, I'm looking at a FE600, have looked through the "Docs" section, but am not finding a good FAQs area for these bikes of the late 90s; 96-99. Any direction would be apprectiated. TIA...

hi all, does anyone know for sure what type of starter i can use for my fe600,i have read that a starter from a cbr600 will wind it over quicker,as well as a r6 starter and so on,i bought a starter from a 01 cbr 600 but it has smaller shaft size on the spline,your help here would be appreicted

Just got a semi-disassembled 99 FE600 on the cheap. There aren't any hoses on the carb. I have the fuel hose and fuel pump hose connected but not sure where the others go. I'm pretty sure the small hose barb aiming down is a fuel overflow line but where do the two brass ones on top go? Thanks!

howdy all, this my my first attempt at chatting in a forum,so here i go, i have just rebuilt the bottom end on my fe600e elduro as well as giving the cylinder head a once over,the piston and rings looked fine as there was no issues with smoke before,but now when its cold it looks like its...

Hello Berg-Fans, my name is Stephen an im from Frankfurt-Germany, got some questions, maybe somebody has a few answers: Yesterday i drove a FE600 from 96, and when the engine was warm, i cant turn into neutral when running. Engine off, then it works. Then one time while starting the carburator...

I HAVE A 95 FE600 IT WILL BLOW BACK THROUGH THE CARB BUT IT RUNS VALVES ARE SET CORRECT I HAD THE CLUTCH COVER OFF TIMING CHAIN IS TIGHT IT FLUTTERS WHEN ITS RUNNING ALMOST SOUNDS LIKE ITS RUNNING RICH WHAT COULD IT BE?

Did any of these bikes come with a black frame? Did a search but was unsuccessful. Thanks.

Hi guys. new to site and wanted to pick the brain of gusy that know more than i do about the bergs. i have ridden dirt bikes for over 20 years, raced MX and ridden fmx competitively for about 10 years as well but have just recently scored myself a husaberg for next to nothing and i am treating...

struggling to figure out whats wrong here, the bike had quickly developed a problem in 3rd gear, its like the clutch is slipping, puts down enough power to roll along, but as soon as you ease on the throttle, it slips, 1st and 2nd gears are perfect and it even seems to be ok in 4th, i'd replced...

I've been doing a bunch of research on these two bikes and am curious as to what you guys think of these bikes for desert riding with tight rock sections as much as full throttle dirt roads... Will the 470 handle that kind of use? Are parts going to kill me vs the 600? I'm riding a crf450r...

Hi folks out there, i am from germany. I'm looking for an original exhaust pipe for 1999 FE600. Is there anybody out there who have one and will sell it ? Thanx.... Stephan

I search on forum but cant find the answer , i don't know how adjusting ignition timing in my berg ,just read owners doc but i have different SEM stator :/ Sebastian

I'll be ressurecting a 1994 fe600. It came without a stator, for which I've found a replacement from a 1996 fe501e. What's the correct procedure for testing the stator (other than putting it on the bike, and see if it'll run ;))? What is a good timing mark to line it up with? I'd like to...

been trying to kick start but there doesn't seem to be any spark or if there's one is must be really weak. I started at the Stator first and working my way back. I've tarwled through the forums and the Owner's doc to glean as much info as I can but still have some questions as it's my first...

I am going to view a '99 FE600 and would like to know of any common faults to watch out for when checking the bike out. The photo I have seen looks good and I have read the posts I can find on this fantastic resource relating to this model. One possible concern is that it has done 25,000...

Hello every one, Are these bikes good? Theres one in the paper for $1200. It runs, but idles like ****, hard to start, but mostly good shape.

Hi friends, I just would like you to tell me about best oil type for my model, since there is a lot of products in market. Pls, gimme a good advise regarding this question. Mobil 5100 ? motorex ? Castrol R4? Thanks a lot friends and regards from Madrid !!!! :wink:

Did I buy a '92 FC600 or FE600 ? Can you tell from the photos? I've been told that it appears to be an FE, although the title/vin says FC How can I tell if the 6spd is a wide ratio or close ratio? Thanks DC