fe450

Hi Im new to the forum and i just traded in my RMZ450 for a Husky Fe450. I modified the exhaust by removing the restrictor cone in the middle of the muffler and I also removed the double screen in the muffler end. Bike runs great but I’m getting 5 long blinks and 3 short blinks. I notice...

Does anyone know if the front brake disc bolt patterns are the same for 2006 and 2009. I want to put on an over sixed disc. Lots available for 2009 and on but not showing 2006.

Hello, Decided to part out my husaberg fe450 2004. I have everything, excluded wheels and wiring. If you are interested in some parts, please contact me via email [email protected] I'm located in Lithuania, Vilnius, but I'm sure we will find solution for shipping. Here's a link to...

Hi! Have swapped engine to a 550 -03 and it won't shift down sometimes. Mostly when i'm at low RPM's. It feels as when you have it in first and try to shift down. Shifting up again is no problem and I have to spam it to make a down shift. Changing the oil soon so I can have a look but...

Hi all, I am missing the original papers and searching for a way to get: 1. best is a copy of the CoC document for VIN no. VBKHAA4059M376648 2. Second a copy of the EU type approval e1*2002/24*0407*00 Thought the EU type approval was enough to get it registrered in DK, but no! If no CoC...

Hello reading this forum for a while but this is my first post as i have found all the answers i needed without asking up until now but now I'm stuck. I have a Husaberg FE450 from 2009 with 101 hr on the clock that cranks but wont start. Last time i used it it started almost perfect and had...

Hi, it looks like something is wrong with my berg, it works too loud comparing to other same husaberg. Sounds come from left side. Oil bolt magnet looks covered too much also. Any suggestions what it could be?

MrSuperSport-MotorSports in beautiful Coeur d'Alene, Idaho area just acquired an 04 FE450 that is complete except missing forks & wheels. Just seeing how much interest there is before dismembering & listing on eBay store. Engine turns over & there is supposed to be a title.

Want to powdercoat a rear swingarm black so im looking for a spare.

Hey All, New guy here looking into purchasing an '06 FE 450. I've actually never heard of a Husaberg until coming across this bike several years ago when it was purchased by a very good friend of mine. Long story short, my good friend passed away, and I've got the opportunity to purchase...

Curious what everyone else's favorite upgrades have been to similar bikes. Primarily going to be a trail bike but want it as comfy as can be for around town errands, hopefully no long freeway, but it needs to be able to maintain 70mph without feeling out of control for a bit to get to trails. I...

Hi! My 450 engine is toast and to expensive to repair so I got a 550 from an -03 instead and I'm currently in the process of trying to figure out the wiring. With the engine I bought came SEM-stator, ignite module and an old wiring harness for the lights. Seems I'm missing the regulator...

Hi everyone. I'm new to the forum and somewhat new to Husabergs. I purchased a 2009 FE 450 last year and will be running it in the Mexican 1000 in a week or so. The issue I have is I need to add a positive on/off switch to kill the bike in an emergency. I have the usual push starter and...

Hi I'd like to change the exhaust now.:mad::mad::mad: I do not have anything on FMF. Do you know any sites you can buy?:cry::cry: I do not care if it's akrapovic. Do you know? It's 2008 year.

Hi All new to the forum and also a new owner of a Husaberg. Looking for some advice on cam chain tensioner ,cold start there a slight "ticking" noise (believe to be cam chain). Iv done some googling and found this is a known issue. So I was just wondering what people experiences were...

Please help and point me in the right direction. My 450 sounds noisy especially on the left side of the engine. The noise sounds kinda like a bearing noise (what I can remember from two stroke bikes with bearing problems) Where do I start looking? Clutch, valves, timing chain, .... or the...

I was out riding, heard a bang, thought "that doesn't sound good" and then about 5 minutes later the bike ground to a halt and has not started since. I've tested the electrical system. The stator, R/R readings were Ok and the ignition coil worked fine on another bike but there is no power from...

Hi All I am looking for a set of new plastics and I was wondering where I could find some. Don't really care about color. They hard to come buy so anyone tried to fit some other plastics instead? Cheers

Hello Husaberg forum. 1st of all i would like to say that i find this comunity to be very cool and helpfull. i really like the Husaberg brand. I am in the final stage of purchasing a September 2007 Husaberg FE 450, Black wheels, black WP forks, yellow/blue and black plastics. Could i...

Hello everyone. I am doing the fork service on my 2010 FE450. I cannot find my service manual. Can someone tell me what kind of oil I need to put in them? Brand, Weight, etc. Thank you