fe450

Loud noise appeared (on the left side?) after oil change and coolant drain (Took water pump cover off to drain). Bike had about 1.4Litres of grey cloudy oil in it and the coolant was also milky. The breather mod a previous owner installed was also gunked up with water and creamy poop that...

My cam got damaged because the intake rocker arm bearing can someone help me with the part number of the KTM camshaft that will fit to my 2004 Husaberg? i may not need high torque.... even 10-15 kw less for my weight are ok, maybe a cam from KTM400 Can I change the damaged rocker small...

Dear members, I'm having trouble with my 2010 Husaberg FE450. I've got the bike for a couple of months now but I'm facing some problems I can't solve... It all started after I washed the bike. The bike started to stall and I've had difficulties to start it again. After I dried the air...

I have the full oem exhaust system with like 10 miles on it. Came off a 2010 FE450 the second day I took it home from the dealer, got lost in my garage and the new owner isn't interested in it. Located in AZ, will ship at buyers expense, make an offer.

Hi, I have FE450 2011 300+ hours on engine and my timing chain is rattling like this i guess. I want to ask. If I will change timing chain for a new one, is it ok? Or I will need to change timing chain and timing chain tensioner? I dont like manual cam chain tensioner. Dirt trics cant...

Hello again, Just an update form my previous post Just finished doing the new head gasket as it was seeping coolant. Finally back in the dirt. Just another question as I am new to the forum. What Ktm speedos are interchangeable with my bike? I feel it might be easier and cheaper to find a...

Hi, Any help on this ongoing saga is much appreciated. 09 FE 450, when its cold the clutch works perfectly, the lever is nice & normal feeling. The warmer it gets, the pressure/friction/engage point of the clutch moves in closer to the bars, leaving excess floppy lever movement, until the...

Hi there¡¡¡ First of all... Happy New Year to all of you ¡¡¡ I am Alberto from the green and hilly Galicia in the NW of Spain. I have had a 2011 FE450 for the last 6 years... I am still thinking it is too much of a bike for me hehehe but I am very happy and not planning to change it. I...

This bike has a repurposed Magura clutch master cylinder connected directly to it's rear Brembo caliper. Has worked fine for many years. As of today, lever goes to the handlebar with no effect. Can't push fluid up through the caliper to the Magura. Can't figure out what's happening. Anyone...

Hey I have recently acquired a 2009 Husaberg FE450 and would like an aftermarket end can. If anyone has one that fits please get in touch. Happy to pay postage from UK or Europe. I am based in the UK. Thanks!

Hello Huseberg forum. Having an issue with my oil drain plug. Threads got stripped, will have to repais using a time insert. How ever does any one know if it is possible to drain the oil via the oil screen plug? And just leave the oil plug resting still, dont wont to upset those fragile...

I started up my FE450 and rode for about a minute then stalled, bike is well maintained and always runs flawlessly. I pulled the fuel line off at the filter and it flows fuel when I crank it (not sure how much pressure its supposed to have but seems ok) It fires right up with a shot of starting...

I fixed the hot start for my FE450 using the valve adjusments as 0.6 turn . very easy kickstart now, event not necessary to use the decomp when hot. But the Estart not work. Accu is just new , Exide AGM 110 A , i have 2 tried electric startes mitsuba in perfect state . Starter turn...

So I was riding normally riding last weekend and cooled the engine before the parkin in the garage (don't remember for sure but the weather wasn't super wet) and let it be there for a week. Then next weekend went driving but it didn't start didn't mind it then because the weather was bit on...

I bought recently this FE450 2004 . Very hard to start when hot ,also in cold condition seems much compression. i opened the camshaft cover for inspection. I found the play of tappets for exhaust over 1 mm play ...( yes 1 mm, right ) , The intake tappets space were around the recomandation...

hi all I'm selling my 2009 FE450 9000kms Fuel injected 70deg engine New Michelin Desert Race front tyre Front and rear wheels balanced, rides great on the road Forks and shock just serviced by Charlie Costanzo New grips Comes with spare seat, indicators, bark busters Currently registered to...

Good evening husaberg.org members, I have recently purchased my first Berg, a Berg FE550 2004 model. Unknown mileage overall condition is OK. My twin brother has also recently bought his first, a Berg FE450 2007 model last month which is in good condition with low miles (1500) and has had...

Pretty excited to be picking up a 2010 FE450 tomorrow! Stopping at local riding spot on the way home to test her out. It has Scott's stabilizer, fan kit, handguards, and a few extras. Pics and ride report coming soon.

Hi all! I'm struggling to find the compliance plate on my 09 FE450. Can somebody steer in the right direction please? Cheers! Brett

Longtime rider. Owned a dozen KTM's including my current '10 400xcw. I've always wanted a Berg and have located a local '10 FE450 that's low hrs and extremely clean and been well cared for. I know the fuel pumps went out early on these, but other than that, anything to be concerned...