fe400

Hello All. I am offering a 1998 Husaberg FE 400 E Enduro Street Legal Dirt Bike Motorcycle with NJ State Title. The Bike is all original and very clean, excellent condition! It has very low use and has been sitting in the garage a few years. It turns over and starts and runs for a few seconds...

I have a 2000 fe400 and I need a swingarm replacement I found one from a 99' will it fit?

I have a 2000 fe400 and I think it needs the pushrod ball bearing put in based on what I've read here because the slave doesn't reach the push rod. I have one do I just put it in the pushrod hole and then stuf the pushrod behind it and ram it in or what? I'm afraid if do that it's gonna drop...

Got an 02 fe400 recently. All works EXCEPT I get no tail light when headlight switch is on low beam. Switch on high beam and it works fine. I tested the switch and everything seems to work properly. Any ideas on where the circuit may have failed?

SOLD - 2003 Husaberg FE400 (GTA - Ontario, Canada) Bike sold. Thanks for looking.

1997 fe400 part out, I have everything it looks like it needs new crankshaft bearings and maybe a few other things. I just bought i new gasket set and air filter, oil filter and spark plug. Let me know what you are looking for, my email is [email protected]

Went for a nice long ride over the weekend. At the beginning, everything was nice and clean. Then I started to notice a mist of oil on the right side of the engine. It was VERY difficult to pinpoint the source of the leak. The entire right side seemed to have a coating of oil from the valve...

Looking at parting out a 98 husaberg fe400. I will only part out when every part is sold. Running complete engine w/15 hrs on rebuild, wossner piston, stainless valves, new starter, and ktm stator $900 Wheel set with blue hubs brake disks and sprocket- $500 Kehin fcr carb 39mm...

hallo, i?m looking for the side stand of my fe400 my 1998. if anyone have one, complete with springs, please contact me. max

Thanks for adding me to the group...I am looking for plastics, a carb intake. Possibly forks..and anything else that will fit on my 1998 fe400 .

Obrigado por pertencer a este fórum. Tenho uma fe400 de 2002 e agora preciso de peças mas esta a ser difícil de encontrar em Portugal, alguém pode dizer se ktm é compatível. Preciso veio da escora /motor. Kit casquilhos da escora Kit juntas de motor Kit retentores motor. Obrigado. A...

I have a 1998 FE400E with a stripped or broken planetary gear between the starter motor and the flywheel so it won't crank. It'll turn over but just won't catch and start. New battery, new coil and spare coil, new air filters, completely clean and rebuilt carburetor, extra gas tank, complete...

Hi, I am new to this forum, and I recently got an FE 400, 2002. It is running fairly well. I just have some adjustments to do. I live near Arboga, Sweden. Stefan

Hi guys, I bought a set of ODI half waffle Lock-on-grips and the adapters for the throttle tube don't work with the OEM Domino throttle on my 2003 FE400. There is one adapter that is very close but it's a few mm to large. Not sure what throttle that might have come from. The packaging for...

I just purchased an 03 fe400 and I want to change all of the fluids and filters. Is there a place where I can order all of these? I keep coming up with 09-12 kits.

I have completed the assembly of my bike ( FE400 1998 ) that i took apart 10 years ago but when trying to kickstart it it just won't start, sometimes i do hear a small bang isch sound like if it wants to start, I have tried using the choke but it makes no difference and i have also tried...

Does anyone have a spare TM 14-05 coil they'll sell me? Or can you tell me where I can get one? I'm drawing a blank searching the interweb. Thanks Charles

Hello. I have a husaberg fe400 from 2001. The engine has 15h since assembly. But now i have noticed that the crank floats 0.9mm axial. I have ballbearing mains, no rollers. Something dosent feel right.. the bike runs great.. and sounds sweet to. What to do? Is the crank slipping in my...

I have following issue, recently bought Fe650 2004, but seems to have 2001 fe400 engine: code on cases is 4011172 Is it possible to build 2005+ fe650 engine basing partially on its parts? What big parts will be needed for sure? Whole inginition setup, 80mm crank, piston, what else? I would...

Good afternoon to you all im new and i have a husaberg fe400 from 98 e bought it about half year ago i did normal service and rode it in the summer a lot on the dirt for about 2 months after that when it got hot it just stall and died and i couldnt start it by foot only with pushstart like...