fe390

Hi, I have been searching all over the internet for information on the max engine speed for my 2010 FE390. The manual only says to not exceed 7K rpm in the first 3 service hours. Other than that, nothing. The reason I am looking for the max engine speed is so that I can figure out what my...

Hi all, Just managed to change my plug for the first time (was doing a valve check). I had tried this on the last valve check but quickly gave up due to frustration w/ tools I had :) I ended up buying the motion pro 14mm plug socket and wow it was so easy! 13mm socket on the end of the...

Looking to replace the rad shrouds on my 390: am I limited to genuine parts or are there aftermarket shrouds from Acerbis etc? I've looked but not seen any. Thanks Steve

Sold!

Thanks to all who responded weeks back to this same post. Your responses led me to a great bike that cannot be registered in GA. If anyone knows of a 390 riding friend considering a new bike, please point me in their direction. Thanks in advance.

Hey Guys, Desperately searching for some of these seal covers for my 2011 fe390 - HUSABERG Neoprene fork protector - Chassis Offroad - Protection - Pure Tech It appears they are discontinued and I dont want no Husky logo on my girl! If anyone knows of any knocking around in a garage...

New to the forum and can't wait to hop off a DR400 and onto the FE390. I managed to miss the NC bike recently posted by a few hours... Congratulations, JoewannaB. If anyone has a 390 and thinking of getting a new bike, please let me know. Thanks in advance.

Greetings, I will take possession of this sweet little number in about 2 weeks. I feel like a kid waiting for X-mas! I posted a question about longevity of these 70 deg. motors and got some very quick replies which helped me to make my decision to buy. Thank You! That told me that this is an...

Greetings, I have the opportunity to purchase a 2010 FE390 with 160hrs. I test rode the bike and fell in love but I am now concerned with the number of hours on the motor. I noticed that the owner's manual states main bearings and pistons to be replaced at 90hrs. I have no idea what the...

..............SALE PENDING............. 2010 FE390. PLATED. Sicass DS kit. All mods complete, except weephole. Map upgrade. CC forks. Cooling fan, risers, hand guards, extra pegs. Brand new Battle Rally front tire/rear 40%. Stock valving, sprung for 220lb. Have uninstalled Cyclops 3800 light...

Need to wire in a Montana pretty quick, am I right in thinking that there are spare accessory wire behind the headlight that I can wire the Montana to? In the little plate the runs across the headstock that locates some of the connector blocks, I've found a connector block that sits...

Just checked the valves on my 390 today. To my shame I realised I'd not checked them for about 160 hours. To the bikes credit, they were all still in spec with both inlets at 0.12mm and both exhausts at 0.15mm. Bike's now on 304 hours and 7807 miles. Whilst looking for the valve clearances...

I have had the berg for a year. Love it, but it came with a slight drip that manifested itself on the bolt of the clutch leaver. Traced it to the master cylinder where the plunger/piston enters. Replaced the plunger after cleaning all parts. To the eye, the bore looked good on the MC...

I am replacing the clutch master cylinder piston with the OEM repair kit. Have the kit, but I notice on the master cylinder has a small hole where it looks like a spring should sit. I don't remember one being there. I have photographed the hole (at the 6 oclock position on the master cylinder)...

Hi bergers, I was riding my 2010 FE390 today for about 1/2 hour when the engine suddenly cut out and wouldn't restart. Dragged it home, found that fuse F2 is blown, and blows whenever I crank the starter. Where should I look for the problem? It's not the fuel pump, I disconnected it and the...

Always wanted the pegs a lower as I've never come near bashing the bottom and would appreciate the extra space, lower C of G for the slow technical stuff that I like and I don't like the idea of spending $35CDN per mm on a Pro Moto Fastway pegs... I'll let you know how they work... The...

Gday Im new to this site (yes been to intro) and apologies if this has been covered previously I am after a wiring diagram and/or a workshop manual for the 390FE Reason being the little fan at the radiator seems to have **** itself and Im thinking fuse,relay etc before fan-something needs...

Hello all you lucky bergermeisters in Europe and Australia get your Bergs already equipped with turn signals, horn etc for street use. Here in North America we have to add those items ourselves. So this is exactly what I'm doing - adding turn signals and horn to my 2010 FE390. Only problem...

Hello friends.. I have been looking for a used Husaberg FE390-350 for about eight months and could not find one in my area or even close by. So I recently purchased a leftover 2011 FE390 from a local dealer in Arizona named Screwy Louie's.. I am excited to get started back into writing as I...

Hey guys, i've done a search but can't seem to find anyone with a similar issue. My bike appears to be running lean, occasionally bogs down on throttle pick up and backfires pretty bad when i roll off the trottle, but only seems to become apparent about 20-30 mins into a ride. I've changed the...