fe350

Hi all I am in the process of replacing my front wheel bearings and seals (2013 FE350). I will also replace the external spacers as mine have been chopped out a bit. I have driven the bearings in until they contact the lip on the inside of the hub. How much of a gap (if any) should...

G'day all My speedo stopped working on a trail ride a few weeks ago - wet conditions and a heap of mud and slop. First time it has done this, despite numerous prior muddy adventures. It started working again once bike was cleaned up and ridden on road the following week. Yesterday on...

I haven't found a rear rack for the plastic subframed Husaberg/Husky/KTM's. Any thoughts?

Hi looking for a workshop manual for husaberg fe350 1993 Would love to have it in pdf //Andreas

Hi I recently bought a husaberg 350fe 1993 And I want to change engine oil before driving, So I wonder witch engine oil should I buy? Thanks for reply! Sorry if the English is bad ! I'm from Sweden, But I hope I made me understand :)

Hello! I have inherited a Husaberg 350fe from a relative. It is completely unused and has been in a garage for 17 years (!). Everything is original and in the same condition as it was purchase in 1997 (except some plastic parts which have been aged and lost a little color). Is it stupid to...

The stock seat cover is junk after a few rides is there a Better one out there?

On a 2014 FE350, I just changed my oil for the first time. There is an icon on the speedo of a wrench that is supposed to appear when the selected oil change interval has been reached. In my manual, it explains how to turn the icon off, but it reads as though that stops the wrench icon from...

Hello All... So I have had a 2011 FE390 that I really loved... but rode a friends KTM 300 and really liked the light feel of the bike.. just couldn't get used to the power delivery (I'm sure with time...) Then when the 350 came out I thought it would be great... nice "electric" power of my...

Hi Just a quick note about some 2013 FE350 issues. My 350 seemed to overheat very easily on any slow uphill or single track. Then it would start steaming so obviously it was boiling but the fan still wasn't on. So after a bit of testing showed that the thermo switch was not really opening...

trying to check and set valve clearances on this model. I am lacking the proper service information. I was wondering if anyone has this info on pdf ?? thanks in advance Chris

WE HAVE (2) BRAND NEW 2014 HUSABERG FE350'S LEFT! FUEL INJECTED 4-STROKE! NORMALLY $9549, ON SALE NOW FOR $7899! NO CHARGE FOR FREIGHT, DEALER PREP., ETC. (NO HIDDEN FEES)! FULL FACTORY WARRANTY! Edelmann's Polaris, Husaberg, KTM, & Husqvarna 172 Edelmann Lane Troy, NY 12180 518-663-5573...

I just bought a 2014 FE350. Does anyone know what mapping is stock? Is it the same as 2013, or did they upgrade the mapping to the EU version or something similar? Thanks

Hi everyone, my name is Chris & I am addicted to Bikes............ My real problem is that i bought a 1992 FE350 that requires a conrod kit. the dimensions are overall length 167mm width small end 18.8mm width big end 18.8mm big end Id 37mm pin Od 30mm pin length 60.90mm small end Id 18mm...

What are the 2 wires for that go into the front brake assembly? Is that for the brake light? The light does not come on using the front brake.

Does anyone have a 2013 FE350 wiring diagram or know how to get one?

Anyone with a good way to find TDC on my '13 FE350? Has a Rekluse, no kickstarter. In the past, I've used the kickstarter on other bike to cycle the engine until TDC was found. Rear wheel spins withthe Kluse :cheers:

Regarding the 2013 FE350 vs the KTM counterpart... Dirt Bike says that the motors are the same but the Berg has more "premium" components internally (they even had an illustration). Dirt Rider says the motors are exactly the same, inside and out. Anyone know for sure?

I have a 96 FE350. The bike starts and runs great. The problem I am having is while putting around with low RPM the bike is bogging really bad from no throttle to about half throttle. If I go full throttle it takes off and nearly throws me off. It also pops alot on decel. I am riding with...

c/s seal # 35000201 for a 93 fe350 is no longer available 28x35x4 where can I buy one? Also c/s spacer #24002001 NLA. Any Ideas?