fe350

94 FE 350 I need the rubber intake boot. Where the carb connects to the engine. Any help directing me where to look would be greatly appreciated. Thanks in advance.

So last year i broke my motor (fc600) So i build new motor with spear parts that i had (fe350) I'm using deltoro 40mm carb so my question is what kinda jetting is good for it? now i have k51 needle 192 main and pilot 45 it works but it's rly stiky in middle range. some times it's cutting spark...

Superb Husaberg FE 350 from 1991 in perfect running order, registered, with all original components. Engine ok, redone by specialist in Austria. Overhauled suspensions. Complete. Excellent condition. I can say collectible because in that year her sister won the world championship in the 350...

I have a pretty nice FE350 I am ready to sell if someone wants it. Very open to offers. I am located near White River Jct Vermont. Call me if interested Matt 802.230.6088

Up for is my 2014 FE350. Bike is extremely clean and cared for. I'm the second owner. I bought it in September of 2017 with 160hrs(1365 miles) on it from the original owner in Ohio. He originally bought the bike new from northern Kentucky. The bike is titled street legal. Has been a trail bike...

Hi all Just wondering if anyone can tell me the diameter of the lower bypass hose (from bottom of thermostat to bottom of RHS radiator) on a 2013 FE350? Mine has a bit of a bad kink and the hose is looking a little brittle so I want to replace it but would like to have a new one to put on...

Replacing the cam shaft bearings on my 350. Anyone have any tips on location TDC I don't see any marks on the flywheel Thanks

Looking for a OEM (with decals) shroud for my 2013 FE350 (left side of tank) but will buy a set if anyone has it for sale.

I need one!!!!!! any ideas guys??? I live in california

Hello, Has anyone on here every replaced the Delo with a Mikuni? I have a BTS 33SS that I would like to try on the old 350. Just wondering if anyone had done this? Thanks, fedge

1995 Husaberg FE350 electrical help!! Hi everyone new member here. I have a 87 husqvarna 430 xc and I recently purchased a 1995 husaberg fe 350e and the wiring harness was a mess. Ive figured out most of the wiring to electric start it but can't get the bike to spark. Ive checked the stator...

I’ve just finished rebuilding my 96 FE350 and went for the first ride today. I noticed oil leaking from the gasket on the bottom end of the cyl. I first torqued the studs to 44nm then realized from another thread on this forum that I should be torquing to 46ftlbs. I’m currently torqued to...

anyone know How to repair, Thanks

Hi all, First time poster, I'm looking at buying a 2013 Fe350, I've found one which looks great but it has a number 43 above the headlight. The owner says it's always been there. My question is was there ever a Fe350 model which came from factory like this? I don't want to get stung with an...

Bike is coming together. Lights didnt work, so I took them off and added an FC front plate. Happy with it so far. Let me know what you all think!

Picked up an old '93 FE350 in rough shape from a local guy who had it in storage for over a decade. After stripping everything down for a good cleaning and inspection, some rewiring and carb cleaning she started up after some out of shape left leg kicking. Overall very happy with the bike so...

I noticed my tank leaking around the cap, turns out the tank is cracked at the base of the cap threads :mad: Previous owner must have really cranked down on it. Anyone have a tank for sale? What other years will fit? I'd prefer to keep the stock yellow, if possible.

Hey Guys, Just bought myself a 96 FE350 and am learning the ropes of owning a Berg. Ran into a problem tonight and need some insight. I was hooking my fuel lines back up earlier and one of my brass tank fittings broke. This would be the upper tank fitting, near the petcock. OEM part # 160...

Hi guys. Today I changed engine oil after another 10 hours which is my usual period and strange green substance appeared on the filter. It has a green colour and plastic characteristics, it´s like a chewing gum. The engine have till now 140 hours and never been dismounted. Every touch inside...

New to the forum. Just been doing some research on this new (to me) bike. Wanted to share : Got this gem coming in to Denver next week. Only 22 hours and just over 300 miles - super excited about it. !!