dellorto

I am looking for the Idle emulsion tube that fits under the pilot jet for my PHM38. As far as I can tell, I am looking for Dellorto part #9980. In the Husaberg parts manual, it is called the Mixture jet tube. Does anyone know of a good place to buy carb parts that might actual stock this thing...

I'm a Husaberg newbie, but I'm already hooked. Never give up, never surrender.... I had Lineaweaver tune the inside jetting for my Dellorto 02' FE501E last week to 7K-10K feet (good job Dale!). But I should have had Dale "baseline" the carb cutaway slide and outside screws too for this...

Dellorto gurus ! When trying to set my mixture and idle screws, the smoothest running is with the mixture screw all the way in. I notice the little washer and rubber is missing and wondered if that could be the reason. Please advise Regards Ady

Am I right or this carb is not a Mikuni but a Dellorto?

I have attached what seems to be a comprehensive guide to tuning. Might come in handy on my quest to tune my beast and get more petrol into the motor than out of the overflow. Was looking in the Doc but not much info for 600's and the Dellorto. Might be handy for older berg owners. Was...

I need to send an invoice to a fellow who won my former Dellorto on eBay and I'd like to get an idea of the exact weight (lbs and oz). Does anybody know? Dale? Thanks for helping!

Im going to attempt to fit a DIY hotstart to my Dellorto. I have some 6mm tube and a tap type thing but I was wondering how you attach the tube/pipe to the manifold? Ta John

I had a couple issues with my 01 FE501e this week-end, mostly stalling at low speed when negotiating turns in the sand or riding on rocks. Also I could not restart it on the button, but one kick was enough 95% of the time. It is equipped with a Dellorto PHM40 which came from the FX470 that...

I got this brand new shiny carb from eBay: http://cgi.ebay.com/ebaymotors/ws/eBayI ... AMEWN%3AIT Really the same exact carb as this: http://www.motorcyclecarbs.com/PHM_W19.cfm Berger and I thought it could work on my 2001 FE501e but we're having doubts now. It seems to be made to...

In The Owners Doc,It Says To Go To FX470 Jetting,Does That Include Changing The Throttle Slide Or Leave That Be?

hey guys, i'm new to the sight but not new to Husabergs, ive owned a berg for 4 years and love it. Shes a 2000 husaberg 400fe (early ser #)it was a test bike from what i was told.regardless heres my problem, i need a needle & seat for the float and a 1 piece float. the carb is a dellorto PHM38...

http://web.tiscali.it/abosco/moto/carb/ ... lorto.html http://www.ducatimeccanica.com/dellorto ... lorto.html

I got to ride my Burg for the first time last night ! Its a 02 FX 470 Demo bike. Parts of the bike are as new as described but other parts are real worn. I set the gap on the valves. and cleaned the carb. I had to pull it to get it started. but then it ran well. I could kick start it while it...

I have stock jetting on my 97 fe600e and went to lower the needle tonight 1 clip worth, and found the needle all the way down already. (clip on top) Taffy, What do I do? running info: starts with button cold and no choke at temps above 75 F. idles perfect instant throttle response...

I have been running one of Dale Lineaweavers LRX2 cams in my 2000 501 for 18 months now. I initially tried to use my standard jetting but had an over rich condition below 5000 rpm that I could not resolve my self so I asked Dale for some jetting help. If you have a Lineaweaver LRX2 cam in...

i recently bought a used dellorto phm 40(it looks brand new). it has the idle and the mixture screw on the right, choke on left(activated by a remote lever) and a button on the left that lifts the slide a bit when pushed(hot start button??). jetting is the standard for fe600 according to...

Hello all, I just recently picked up a 97 FE501. It runs a little funky and I think it needs a rejetting. Can anyone tell me where I can find jets for the stock 40mm Dellorto round slide? Preferably a US dealer. Also, has anyone swapped a Mikuni on to one of these bikes? Is there any advantage...

How does the new keihin carb perform? I LOVE the dellorto on my '99 fe400. It does everything well,. Its incredibly responsive. It is virtually immune to changes in altitude. It is remakably efficient. And, it doesnt flood on the few occasions I have laid my bike over! What more could anyone ask...